Good source for boat stands?

Buju · Post by **Buju** » Sep 19th, '09, 15:19

Did the usual google search with some good results...
but I'm thinking you guys may know of a better place to order some stands for the B20 and B25.

CMP · Post by **CMP** » Sep 19th, '09, 16:37

Hey Mark, if you can wait until I get down in early Nov., I can bring you some Brownells...

CMP

Raybo Marine NY · Post by **Raybo Marine NY** » Sep 19th, '09, 18:44

there is a neighboorhood marine supply store next door to me, they had stands in there for less then $80-$90.

My point? Try some local places so that you save on the shipping.

Buju · Post by **Buju** » Sep 20th, '09, 06:35

Very kind of you Mark, and the Brownells are real nice too. But I need to get some to call my own so I can use and abuse them as I see fit.

Yeah I know Robbie, the shipping will be a bitch. No one sells 'em around here. I've checked all the boatyards in the upper keys. I'm sure I could find 'em in Miami or Lauderdale, but at that point I may as well order the things.

Thinking of going w/ these guys:
http://www.hostarmarine.com/stand_shop/stands/

pacific marlin · Post by **pacific marlin** » Sep 20th, '09, 06:50

Mark,
Just an idea I'm toying with, is to buy some Acro (Acrow?) props and make my own.
There as cheap as chips on e bay, unlike "proper" boat stands or anything
else that says Marine on the box.
Ian.

jspiezio · Post by **jspiezio** » Sep 20th, '09, 07:37

http://cgi.ebay.com/ebaymotors/Boat-Sta ... iesQ5fGear

http://cgi.ebay.com/ebaymotors/4-Browne ... 06.c0.m245

Edited in the correct link on the second page

Raybo Marine NY · Post by **Raybo Marine NY** » Sep 20th, '09, 08:20

places dont normally stock them, but I know I can order them and have them the next day from my suppliers.

I guess if you have asked and no one wants to bother then you have no choice, I believe you can order direct from brownells
they just slap a shipping label right on the stand and ship UPS so at least they dont charge you a crate charge

CaptPatrick · Post by **CaptPatrick** » Sep 20th, '09, 08:47

Mark,

Another alternative is to order just the screw and wing nut with the angle iron installed and then roll your own from local steel supply. Even if you don't weld yourself, there's probably a bunch of other Conchs that will do it for you. You can pre-cut your 1 1/2" pipe and angle iron and then have the welder assemble them... Order either directly from Brownell or Hostra...

The freight for the basic hardware would be fairly light because they'll ship UPS Ground or FedEx Home Delivery.

CMP · Post by **CMP** » Sep 22nd, '09, 19:57

Mark, what I meant was I can buy them for you and transport them. I'm keeping mine :wink: !!!

CMP

randall · Post by **randall** » Sep 22nd, '09, 20:07

i made my own by cutting up and welding discarded ladder racks...work great....custom you know. got discarded screws and pads from a marina. they still work when the pads are beat up.

Buju · Post by **Buju** » Sep 24th, '09, 17:22

Thanks guys... all good advice.

Think I'll do what the Capt. recommended, there are three welders less than a mile from me, and the screw/pad assembly is substantially less coin than the whole shebang...

bertram31.com

Good source for boat stands?

Good source for boat stands?

Who is online