sunk 31 cape cod

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
John C
Posts: 71
Joined: Aug 29th, '06, 10:54
Location: Manasquan NJ

sunk 31 cape cod

Post by John C »

A friend sent me a story from a cape cod news paper about a 31 hitting some rocks and sinking...Boat was The Raven. Skipper was saved by the USCG
Matt29
Posts: 60
Joined: Oct 30th, '06, 06:04
Location: Toms River, NJ

Post by Matt29 »

waggles02673
Senior Member
Posts: 73
Joined: Jun 30th, '06, 06:10
Location: Cape Cod

Post by waggles02673 »

That boat was all redone as well. I used to keep my B28 in the river and run in and out of there all the time with the new boat. It gets real shallow at low tide if you stray from the channel for about a mile off the mouth. I am surprised by the sinking as that boat is kept at one of the big houses at the mouth of the river and has been there for several years and the Capt had to know how shallow it gets. Then again as Mark can confirm you see guys cut the channel all the way to the no wake zone.

Jon
User avatar
CMP
Senior Member
Posts: 250
Joined: Jun 29th, '06, 10:06

Post by CMP »

There's a rock in there and that's what he hit. It used to me marked, but no more. He's 77, had a fight with his girlfriend and off he went. You add the rest of the puzzle pieces...

CMP :shock:
User avatar
Rawleigh
Senior Member
Posts: 3444
Joined: Jun 29th, '06, 08:30
Location: Irvington, VA

Post by Rawleigh »

Is the boat going to be repaired?
Rawleigh
1966 FBC 31
User avatar
CaptPatrick
Founder/Admin
Posts: 4161
Joined: Jun 7th, '06, 14:25
Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com

Post by CaptPatrick »

Image

Now, I ask again, how many of you haven't replaced the strut pads in your boat?????

I'd just about put money on "IF" there were replacement strut pads, according to my way of construction, there would have been no sinking... Just a bent wheel & bruised pride.

Does the phrase; "It ain't IF, but WHEN" mean something now? CAUTION! -- Perhaps the weakest structural element on the Classic Bertrams is the strut backing pad. (Boatbuilding Tips and Tricks)

Br,

Patrick
Br,

Patrick

Molon labe
User avatar
thuddddddd
Senior Member
Posts: 1028
Joined: Jun 29th, '06, 07:42
Location: N. east Ma, home of fat teddy

Post by thuddddddd »

31' cabin cruiser, bahabaha
User avatar
Bruce
Site Admin
Posts: 3789
Joined: Jun 29th, '06, 12:04
Location: Palm Beach Gardens, Fl.

Post by Bruce »

The cause of the sinking was not immediately known
What a brain surgeon the writer must be!
User avatar
Dug
Senior Member
Posts: 2256
Joined: Jun 29th, '06, 11:04
Location: Worcester, MA

Post by Dug »

Patrick,

You saw, at least one side of mine is going to be solid! I trust the other side as well, but your method has been applied to the port side and she be solid!!!! The log was my close call on that vulnerability!

That stinks for the owner of that boat.

Anyone know if she will be repaired?

Dug
merlin
Posts: 9
Joined: Jul 2nd, '06, 00:32
Location: S.F.

Post by merlin »

Patrick,

thanks for the info -- I went and read the article. It is something I had
not noticed on the site before. My backing plates are under saddle tanks
most likely they are original. Next time I haul I'll plan on doing something about this.

I am getting a little closer on the helm pod. My work schedule has wreaked havoc on my rewire plans this summer but we are back at it now.

regards, Merlin
Post Reply

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 350 guests