Bertram 31 half mold

Bertramp · Post by **Bertramp** » Apr 28th, '13, 22:02

Joe E wrote:Buju, sorry to hear that. I hope everything is ok, let me know if I can help in any way.

If the group and Bertramp (Steve) is good with it I would be happy to take the lead. It will take me a week to get the mold ready to pull off of and I think I can pull two a week with my schedule.

Joe

My goal was to get the mold.... ready and willing to pass the baton to the next runner.

DanielM · Post by **DanielM** » Apr 28th, '13, 22:29

Buju,

Hoping for the best on your MRI. I hope it turns out as well as you can hope for. I know about the body falling apart after years of not doing the things I knew I should have. Sucks to get old but beats the alternative.

Good Luck,

DanielM

ljmauricio · Post by **ljmauricio** » Apr 29th, '13, 06:35

I started this thread, read it from top to bottom, and can't find an address to send a check. Someone please clue me in....Thanks

Bertramp · Post by **Bertramp** » Apr 29th, '13, 08:20

see bottom of page 3

Tommy · Post by **Tommy** » Apr 30th, '13, 17:04

ljmauricio, thank you for alerting the home team to the B-31 half mold; and thank you Steve "Bertramp" Kelly for closing the deal! My check is in the mail today to:

Steve "Bertramp" Kelly
PO Box 778
Sag Harbor, NY 11963

Thanks again to both you guyus, and to all the contributors!

Keith Poe · Post by **Keith Poe** » Apr 30th, '13, 20:28

$25.00 ?

Bertramp · Post by **Bertramp** » May 1st, '13, 08:52

Keith Poe wrote:$25.00 ?

yes...if anything beyond the cost of the mold is received, it will go to the website.

34Hatt · Post by **34Hatt** » May 2nd, '13, 08:17

As a suggestion maybe who ever is first, make the first one into a plug. Just a nice heavy strong layup with a flange then save that and you can always make more molds.

Nice piece to have good luck.

Bertramp · Post by **Bertramp** » May 12th, '13, 19:54

thanks for checks sent.
Due to normal crazy lifestyle, I have not gotten to PO Box to grab them and will not until Memorial weekend.

Bertramp · Post by **Bertramp** » May 28th, '13, 05:26

well...
Yesterday either the computer hic-uped or my brain farted, but my posts here didn't go through correctly.
I did finally get to the post office.
I have the following checks .... and then some.
As stated once before, all funds received in excess of $275 (I kick in $25 too) will be forwarded to Patrick towards the website.

1. Ray Wicklund - $25 and some VERY cool gifts for my wife for doing the actual pickup...she was blown away !! ....thanks again
2. Mike Kennedy - $25 and a big kiss to my wife from "the family"
3. Craig McCarville - $25
4. Harry Woods - $25
5. Charlie Johnson - $25
6. Leo Mauricio - $25
7. Mike Ohlstein - $25
8. Ian Upton - $25
9. Tommy Drake - $25
10. Russ Pagels - $25
11. Bob H - $25
12. Luis - $25
13. John (whaler 1777) - $25
14. Gert Van Leest - above and beyond !! ....and in Euros ....very cool. :-D
15. Steve "Bertramp" Kelly - $25

If you sent and I did not mention above, I didn't get it....so please let me know.
All the best and thanks guys.
As is....a friend is driving north this weekend and the mold will be in her car and on Long Island by next weekend.

Gert van Leest · Post by **Gert van Leest** » May 28th, '13, 14:37

Steve

Thanks for organizing !!

Gert

Ed biggie · Post by **Ed biggie** » Jun 3rd, '13, 21:54

Can I get in on this and I live in ft laud have a glass guy that works for me !! Will help in any way

Bertramp · Post by **Bertramp** » Jun 4th, '13, 08:09

The hull mold is presently in Sag Harbor, NY.
I/We need to find the right glass guy.

Tony Meola · Post by **Tony Meola** » Jun 4th, '13, 22:16

Steve

Let's see what Ed Biggie the post right above yours can do for us.

bbtiller · Post by **bbtiller** » Jun 5th, '13, 10:04

Steve,

Check's in the mail.

Bradley Tiller

Bertramp · Post by **Bertramp** » Jun 5th, '13, 12:50

Tony Meola wrote:Steve

Let's see what Ed Biggie the post right above yours can do for us.

I wish he was around before I had it "shlepped" (I'm from NY, I know Yiddish) north to NY.
Ed ... please send a PM

Bertramp · Post by **Bertramp** » Jun 10th, '13, 13:10

Tony Meola .... thank you ... got it and very much appreciate the gift for the wife.
She actually lived in Hillsdale at 73 Baylor and her kids (now 28 & 30) went to the local high school.

I'm probably going to meet with Ed Biggie in FL this weekend.

Tony Meola · Post by **Tony Meola** » Jun 10th, '13, 22:26

Steve

Been here for 17 years. Grew up a couple of towns over. When did she leave? Always like this corner of the County. We are tucked away from the maddening crowd of Paramus (shopping center of the world) but can be there in 10 minutes. Kinda of the best of both worlds.

Enjoy

Brewster Minton · Post by **Brewster Minton** » Jun 11th, '13, 20:10

Steve, when you are around call me 631 457 2587

CaptPatrick · Post by **CaptPatrick** » Mar 9th, '14, 22:58

Been about 8 mo since the half mold was last mentioned.... ????

Stuart Cooperrider · Post by **Stuart Cooperrider** » Mar 10th, '14, 17:41

I'm in as well. Not sure where the thread has traversed but please include me in all forward communication. Thanks. Very cool. Let me know the details.
-Stu

Tony Meola · Post by **Tony Meola** » Mar 10th, '14, 21:00

Last we left it, Joe E said he could help out building the half molds. I don't think it went any place after that.

Bertramp · Post by **Bertramp** » Mar 11th, '14, 18:12

The mold is presently residing in Sag Harbor and is available to anyone that can make it happen.
Just let me know.

Dug · Post by **Dug** » Mar 12th, '14, 08:34

Want me to ask Skip Helme? He is doing the work on Alchemy, and owns a 31 named Wahine. He has talented guys...

Thoughts?

ianupton · Post by **ianupton** » Mar 12th, '14, 09:24

I am game to get anything started.

I'll take mine in Seashell green. :)

Ian.

bob lico · Post by **bob lico** » Mar 12th, '14, 19:27

i am in and will back buju with funding if needed because he is the best at this game .just PM me brother . Captain i have given up with iPad this site just does not like it so i must go to office and post on mac.

Carl · Post by **Carl** » Mar 13th, '14, 06:24

bob lico wrote:i am in and will back buju with funding if needed because he is the best at this game .just PM me brother . Captain i have given up with iPad this site just does not like it so i must go to office and post on mac.

Bob...try shutting the Auto-Correction off on the I-pad

Go to "Settings"
First selection on the left is "General", give that a tap
Now on the right side go down a bit till you see "Keyboard", select that.
The second selection on the right is "Auto-Correction"...Toggle button to off.

As long as you leave the Spell Check on you will still be prompted to correct misspelled words by underlining them...but at least the damn thing won't be rewriting your entire post with gibberish when you hit "Send".

Carl

Bertramp · Post by **Bertramp** » Mar 13th, '14, 08:46

I will be in Sag either this weekend or next and in Lauderdale the last weekend in March.
I can bring it south with me if Buju is o get it, I just need to know group decision in advance.
They DO give me a funny look in the airport, similar to when I brought a fender on the plane :-D

Dug · Post by **Dug** » Mar 13th, '14, 09:40

Just let me know if you want me to ask Skip. How many, and price target each.

Steve, if you wanted to, you could just ship it to either me or Skip at Brewer Street Boatworks, if we decide thats what we want to do.

I'm only trying to help, and don't need to be involved in any other way than to facilitate. Summer is a great time for him to do this kind of work, as they don't do a huge amount of glass work during summer.

Dug

Yannis · Post by **Yannis** » Mar 13th, '14, 12:19

I don't know if its pertinent but, while you're at it, can we discuss about a B28 half mold?

John Swick · Post by **John Swick** » Mar 13th, '14, 17:25

Ahhhh...stupid question...has Capt Pat already declined the opportunity to do the production run ??

Navatech · Post by **Navatech** » Mar 13th, '14, 17:28

Yannis wrote:I don't know if its pertinent but, while you're at it, can we discuss about a B28 half mold?

This mold was purchased as is... Manufacturing a B-28 mold is going to be problematic... BUT, unless you know it's a B-31 you could mistake it for a B-28 ;-))

Tony Meola · Post by **Tony Meola** » Mar 13th, '14, 21:07

I would guess to start you are talking about at least 10 hulls. I am not sure if Buju is on board for this. If he is fine, if not we ask Dug's contact. Whomever, we get if they are a family member, then we need to make sure that they are compensated for their efforts. After all a stranger is going to make a profit on these.

JDaniels954 · Post by **JDaniels954** » Mar 13th, '14, 21:47

Hi I was wondering if anything ever happened with this half mold, if so or not do we have an idea of pricing?

Bertramp · Post by **Bertramp** » Mar 14th, '14, 08:28

John S wrote:Ahhhh...stupid question...has Capt Pat already declined the opportunity to do the production run ??

Patrick was given first shot and declined. If he chooses to reconsider, In my mind, he would be the guy for the task.

bertram31.com

Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Re: Bertram 31 half mold

Who is online