Atlantic City
Moderators: CaptPatrick, mike ohlstein, Bruce
- Doug Crowther
- Senior Member
- Posts: 259
- Joined: Jun 29th, '06, 09:22
- Location: Beaufort NC & Concord,Va
- Contact:
Atlantic City
Crows Nest has developed a leak between the a/c seacock backing plate and the hull. I can't get her hauled and repaired in time to make the 160 mile run to AC. My slip is available -contact Charlie Haws. John F.,Mack, and I are working on a plan "B" to drive up.
Bummer
Bummer
- Doug Crowther
- Senior Member
- Posts: 259
- Joined: Jun 29th, '06, 09:22
- Location: Beaufort NC & Concord,Va
- Contact:
Jk,
She's not going to make it. I can't make the time and the marina down the creek says they wouldn't be able to get around to it until Friday afternoon. Since the bonding wire and what held it are pretty much eaten up I have no confidence in the thru hull itself.
We'll make it up Saturday but without the boat.
Doug
She's not going to make it. I can't make the time and the marina down the creek says they wouldn't be able to get around to it until Friday afternoon. Since the bonding wire and what held it are pretty much eaten up I have no confidence in the thru hull itself.
We'll make it up Saturday but without the boat.
Doug
- Doug Crowther
- Senior Member
- Posts: 259
- Joined: Jun 29th, '06, 09:22
- Location: Beaufort NC & Concord,Va
- Contact:
- thuddddddd
- Senior Member
- Posts: 1028
- Joined: Jun 29th, '06, 07:42
- Location: N. east Ma, home of fat teddy
stuff
or broken out riggers or oil lines or what ever, Mr maintence guru.....
Should have used the hilti sawzall instead of the home depot dewalt to remove the fitting......
As you've turned into a wuss as of late, I'm drinking the good bourbon I got for your arival tonight(that andI drank all the singlemalt last night and forgot to restock)
Hurry up with the future miss x , the cutting is scheduled for mid aug
Should have used the hilti sawzall instead of the home depot dewalt to remove the fitting......
As you've turned into a wuss as of late, I'm drinking the good bourbon I got for your arival tonight(that andI drank all the singlemalt last night and forgot to restock)
Hurry up with the future miss x , the cutting is scheduled for mid aug
Doug,
It won't be the same without you. Who's gonna eat all my bagels and bass on Saturday morning? Hope I still make it. Had some problems running on Sunday. Hoping it's just the gas losing some of it's punch from sitting since my accident. Sputtering, fluctuating, not making full revs, burning more and going slower.....just a few things right now. Hoping to burn all that old crap out on the run to AC and putting some fresh crap in the tank and hoping the problems go away.
It won't be the same without you. Who's gonna eat all my bagels and bass on Saturday morning? Hope I still make it. Had some problems running on Sunday. Hoping it's just the gas losing some of it's punch from sitting since my accident. Sputtering, fluctuating, not making full revs, burning more and going slower.....just a few things right now. Hoping to burn all that old crap out on the run to AC and putting some fresh crap in the tank and hoping the problems go away.
Harv
I spoke with Doug yesterday and will put up the MD guys on my boat.
On sunday I had a starter go up on the stb motor, I was able to get it replaced and then the motor wouldn't start. I changed filters an checked a bunch of stuff. It seems it had a vapor lock from when I switched my old fram fuel/water seps for new Racors. After about 2 hours last night I got her running & everything seems good.
On a happier note, I stopped on the way home yesterday and picked up plenty of frozen drinks & rum. So make it or not, I'm planning on having a good time.
Well, it's time to go wash the boat and then drop the kids off with Grammie. I should be leaving at about 11am this morning and plan to make Cape May for Dinner. From there it looks like a short 2 hr run to Atlantic City on Thursday.
See Ya'll up there,
JohnD
On sunday I had a starter go up on the stb motor, I was able to get it replaced and then the motor wouldn't start. I changed filters an checked a bunch of stuff. It seems it had a vapor lock from when I switched my old fram fuel/water seps for new Racors. After about 2 hours last night I got her running & everything seems good.
On a happier note, I stopped on the way home yesterday and picked up plenty of frozen drinks & rum. So make it or not, I'm planning on having a good time.
Well, it's time to go wash the boat and then drop the kids off with Grammie. I should be leaving at about 11am this morning and plan to make Cape May for Dinner. From there it looks like a short 2 hr run to Atlantic City on Thursday.
See Ya'll up there,
JohnD
- Doug Crowther
- Senior Member
- Posts: 259
- Joined: Jun 29th, '06, 09:22
- Location: Beaufort NC & Concord,Va
- Contact:
Timmy aka THUUUUUDDDDD,
Mid August- I'm there. Taking a sawzall to a Hatteras is worth the cost of the flight. Wuss-I think not. I've broken plenty of stuff so far this year. Ask the guys about coming in on one engine during the shark tourney and picking up a deck hatch to find 18-20 inches of water in the bilge. Pretty sure there's something wrapped around my stbd wheel right now but the jellyfish are so bad I'm not diving to find out what. John F had his a/c clog up because he sucked one in earlier this week. Counted 20 standing on the end of my pier this morning.
Doug
Mid August- I'm there. Taking a sawzall to a Hatteras is worth the cost of the flight. Wuss-I think not. I've broken plenty of stuff so far this year. Ask the guys about coming in on one engine during the shark tourney and picking up a deck hatch to find 18-20 inches of water in the bilge. Pretty sure there's something wrapped around my stbd wheel right now but the jellyfish are so bad I'm not diving to find out what. John F had his a/c clog up because he sucked one in earlier this week. Counted 20 standing on the end of my pier this morning.
Doug
Who is online
Users browsing this forum: Google [Bot] and 76 guests