No complaints here

Harry Babb · Post by **Harry Babb** » Feb 27th, '11, 12:35

The past week or so has been simply beautiful weather here on the Gulf coast. Highs in the 70's comfortable humidity and low at night in the 50's.

Today I noticed a load of yellow pollen on my truck, the oak leaves are falling and spring is all around us.

Next week is gonna take a dip back into the 30's at night but spring is fighting its way into our area of paradise.

I expect to see Robins flying within the next week or so.

We paid our Winter Dues.....bring on the summertime

hb

dougl33 · Post by **dougl33** » Feb 27th, '11, 13:26

That's great Harry. We just got another 6 inches of snow in Marblehead, MA. I gotta move.

Charlie J · Post by **Charlie J** » Feb 27th, '11, 16:00

keep the robbins away from uv, hit 51 today up here, hope to start cleaning the boat in the next couple of weeks

Bob H. · Post by **Bob H.** » Feb 27th, '11, 17:26

Harry, Now you can open that door a send us some of that spring stuff...had enough plowing for this year...BH

IRGuy · Post by **IRGuy** » Feb 27th, '11, 17:48

Doug...

Come on down!

It was 71F today, beautiful.. yesterday was the same. Spent both days working on the boat is jeans and a tee shirt!

Frank B

dougl33 · Post by **dougl33** » Feb 27th, '11, 20:19

Thanks Frank. I'm heading down to see Tim in Naples in a couple of weeks.

Harry Babb · Post by **Harry Babb** » Feb 27th, '11, 22:00

Okay boys.....the south door is open......GET READY! ! ! !

Sanded more today.....have ALL of my bottom epoxy and bottom paint here and ready.....will paint the deck with in the next few weeks......

Gotta get the painting done before the LOVE BUGS show up.

Getting my second wind for the 22nd time........this one may be the charm.....

hb

Bob H. · Post by **Bob H.** » Feb 28th, '11, 21:39

Harry, Having fun with that bottom sanding? I know better...keep at it my friend...you can do it....spring time makes us all feel better...BH

Harry Babb · Post by **Harry Babb** » Feb 28th, '11, 22:25

Bob
I have been sanding on the deck. Not far from being ready for paint. I have ALL of the bottom epoxy and antifoulant paint sitting in my office. Looking at the recommended timeline on bottom painting it looks like I don't need to start the final bottom painting until about 2 weeks or so before "Splash Day".

Saturday afternoon Chris and I did the final engine alignment. Both engines are anchored down hard and fast, all systems are hooked up and nearly complete.....I am going to redo my seawater intakes and add crash valves.

Now its time to face what I dread the most.....fill fair and paint. The good thing is that I am getting excited once again

hb

Brewster Minton · Post by **Brewster Minton** » Feb 28th, '11, 23:10

How about some pics?

Carl · Post by **Carl** » Mar 1st, '11, 12:06

Brewster Minton wrote:How about some pics?

I know you got it bad when you ask to see pics of Harrys bottom...

Harry Babb · Post by **Harry Babb** » Mar 1st, '11, 21:43

Here ya go Brew.....

[img][img]http://i147.photobucket.com/albums/r289 ... G_4130.jpg[/img][/img]

[img][img]http://i147.photobucket.com/albums/r289 ... G_4147.jpg[/img][/img]

[img][img]http://i147.photobucket.com/albums/r289 ... G_4139.jpg[/img][/img]

[img][img]http://i147.photobucket.com/albums/r289 ... G_4140.jpg[/img][/img]

hb

Tony Meola · Post by **Tony Meola** » Mar 1st, '11, 22:11

Harry

That is starting to look good. Love those Stainless Struts. Did you also make up stainless rudder ports?

Before you know it you will be in the water.

Rawleigh · Post by **Rawleigh** » Mar 2nd, '11, 09:24

Lookin' good Harry!!

bob lico · Post by **bob lico** » Mar 2nd, '11, 09:36

reverse turbo installation on port engine -----nice inovation to avoid 360degree sweep, offset air intake nice harry nice. i guess my long conversation with you was applied to the extended and glassed shaftlog -----excellent.

Brewster Minton · Post by **Brewster Minton** » Mar 2nd, '11, 09:39

Harry, very nice.

Carl · Post by **Carl** » Mar 2nd, '11, 10:46

Gotta admit...one nice bottom!!

Looking good!! It won't be long now...

I hate those Aluminum Pilister fillers...next time the aluminum blisters thru the paint I make in fiberglass.

bob lico · Post by **bob lico** » Mar 2nd, '11, 10:52

harry did you make those structs or are they jusy modified (contoured and streamlined flange)?

Harry Babb · Post by **Harry Babb** » Mar 2nd, '11, 18:17

Bob Lico wrote:harry did you make those structs or are they jusy modified (contoured and streamlined flange)?

We did fabricate the struts Bob. Used 316L Stainless Steel. We used plate and bar and a whole buncha arc gouging and grinding.

You like??

hb

Harry Babb · Post by **Harry Babb** » Mar 2nd, '11, 19:14

Tony wrote:Did you also make up stainless rudder ports?

Tony
I used the original rudder ports. They were worn "Egg Shaped" so we chucked them in a lathe and bored out the fits until they were round. The wear was heavy on one side. The original bore on the bottom was 1.5" and by the time we got it cleaned up and round the new bore size was 1.565". From there I made my rudder shafts oversize to fit the oversized rudder ports.

On the top of my rudder shafts....above the square.....I added a 15/16" diameter area that will ride in a bearing. I tried to take a pic yesterday and post it here but the pic would not load correctly. Will try again later.

I am getting there, but simply cannot believe how much I have drugg my butt on this project.....DeNada has been "On the Hard" for 3 years 3 months and 2 days now......no bull.....that's an accruate number! ! !

I don't see how the average bear survives without a full machine shop/welding shop at their disposal complimented by a morale support group of Bertram 31 buddies with a whole list of boat building/cooking/fishing/mecanincal/and bull skit...skills to keep them motivated.....LOL

hb

Harry Babb · Post by **Harry Babb** » Mar 2nd, '11, 19:44

Upper Rudder support pic.....when installed the shaft protrudes thru the bearing shown in the pic and a locking nut threads onto the shaft, supporting the weight of the rudder. This should take a big load off of the rudder port.

hb

bob lico · Post by **bob lico** » Mar 2nd, '11, 19:44

i think they are the cats ass . truly a fantastic machine shop work of art. you know and i know there are a hold lot of critical angles that are part of this job.

Capt. DQ · Post by **Capt. DQ** » Mar 2nd, '11, 19:59

Damn Harry, now you just plain showing off. But I'zzz sure like those props as you will too. Looking good Harry, will you come do my bottom too? hahaha! :) :wink:

Doug

Harry Babb · Post by **Harry Babb** » Mar 2nd, '11, 20:02

Doug wrote:Looking good Harry, will you come do my bottom too? hahaha! :) :wink:

Bout time to meet at Cobalts and talk about it.....might even get Kelly and Kipp in on the conversation.

hb

Tony Meola · Post by **Tony Meola** » Mar 2nd, '11, 21:15

Harry

The rudder port set up looks slick. When you have a machine shop to use there is almost nothing you can't do.

You went way further into your project than I did, and it still took me two years of weekends, mostly summer to get in the water and I still have odds and ends to do. Then after that I need to think about the Cabin.

God it doesn't end. But in the end it is all worth it. Just watch Dug's video he posted.

Capt. DQ · Post by **Capt. DQ** » Mar 2nd, '11, 22:54

Harry, just let me know when.

DQ

Bob H. · Post by **Bob H.** » Mar 3rd, '11, 19:14

Harry, Lookin good...and youve had em running to boot..you know its been a long winter when the boys are lookin at your bottom pics...
Love the rudder support bearings...Denada is going to be quite a sleeper..pull up along side a new Grady and walk away from them, leave em scratching their heads, what the hell....saw it first hand on Brews boat goin to get the rendevous chow...PRICELESS...BH

kellysmall · Post by **kellysmall** » Mar 3rd, '11, 23:21

Count me in Harry. I can bring you pictures of how I did my rudders on the B25.

-Kel

Harry Babb · Post by **Harry Babb** » Mar 4th, '11, 08:24

Sounds good Kelly....

How that YOUNGERN doing???? Asked to borrow the Bertram yet???.....LOL

I am sure you and Janine are having a ball.....

hb

kellysmall · Post by **kellysmall** » Mar 6th, '11, 22:52

Audrey's doing fine, Harry. Growing like a weed. She's just now trying to say mama and dada, but I'm tryin' to teach her how to say "captain". Most kids her age are busy shaking rattles, but Audrey seems to have more fun with my billfish tags. I caught her getting into my unrigged rubber skirted lures the other day. Gonna be tough to leave her at the dock before long.

bertram31.com

No complaints here

No complaints here

Who is online