prop help - Able Mable (old SeaNile)

[wlbsr]

I broke a shaft and my port prop went to the bottom saturday. I have hytorq 20 inch with a 23 pitch, 1.5 bore. It takes 6 weeks to get a new Michican (old hytorq). 2 shops in Morehead NC don't have anything on the shelf. Looking for some prop shops to find something in stock or to potentially buy a matching pair if I have to. Thanks for your help in advance. Bill Blount

[THESALTYSATO]

Bill
try Wildcat prop shop in Chesapeake Virginia
also Big Rock propellers in Morehead City
sorry that happened

[Snipe]

You could try acme propellers or veem conquest both are used on some 31 setups with good results!

[EarleyBird]

I have a couple sets of propellers if you get in a bind. Gladly lend you one of them if they’ll work. All 1 1/2”. Have 5.9 BTA Cummins 270HP. One set are Hy-Torq. 20X22 4 blades #7 cup. The other Hy-Torq 21X23 3 blades. EarleyBird. Presently I’m running DQX 20x22 with a medium cup and they have increased EarleyBird’s cruise speed 23-2400 rpm quite noticeably. EarleyBird

[Tony Meola]

I have to second what Early Bird said. I have the same set up but my DQX's are 20x23 with some cup.

Try Bobby Soles in Florida.

https://www.bobbysolespropeller.com/

Or Atlantis Propeller.


https://atlantisprop.com/

[wlbsr]

thanks for all the replies. went with a new set off the shelf of what I had from general prop in Bradenton FL on a referral from Coastal Prop in Wilmington. hopefully they are on ups as we speak. thanks again and now I have a 20Rx23 4 blade hytorq on my shelf if anyone is ever in need.

[bbtiller]

I have a pair, recently tuned/one new, for the 31 I recently sold. Will sell. Georgetown,SC. bbtiller@gmail.com

[John Nardi]

What size are the props and are they 3 or 4 blade? What are you asking for them?? Thanks John