Calling B25 owners!

[CamB25]

I may have asked this question in the past, but I can't find the thread...

I need to decide on the location of the midship cleats before I paint the cap Friday. Based on my old pictures, these are located somewhere aft of the max beam and forward of the fuel fills. Can someone give me a rough measurement from the transom corner to center of the cleat?

Thanks
Cam

[Joseph Fikentscher]

Mine are mid-window.
https://www.facebook.com/enduranceb25/p ... =3&theater

[CamB25]

That's the spot...just need to find that spot on my modified cap. Any chance you could measure? thanks

[Joseph Fikentscher]

I'll probably get to the boat tomorrow.

[CamB25]

Thanks!

[ktm_2000]

Cam,

It seems that you've made a lot of progress on your boat since we've last talked.

I don't have an exact measurement but my boat didn't have mid-boat cleats when I bought it, I added a pair of pop-up cleats about 18-24" behind the main bulkhead.

[scot]

Center of the mid-ship cheat to the aft end of the stern cap is 145", measure along the gunwale.

[CamB25]

Thanks, Scot. That seems to be the spot. I sprayed the cap with 3 coats of Awlcraft 2000 - Oyster White today. It took every bit of a quart +mixers to do it. Lays out nice and shines pretty well. Highlights all the imperfections in my fabrication work, too!