Dear all,
Did some of you have used or uses an Hydrohoist SIDE-TIE B model (12000 lbs) for his B31 ?
I need some advices before buying one.
Thanks
http://www.thehulltruth.com/boating-for ... eeded.html
Hydrohoist
Moderators: CaptPatrick, mike ohlstein, Bruce
- Olivier
- Standing Member
- Posts: 40
- Joined: Jun 23rd, '13, 07:18
- Location: Puerto Princesa, Palawan, Philippines
Hydrohoist
1972 BERTRAM 31 hull number NJZ594940686
Re: Hydrohoist
I don't know anything about those lifts, but 12,000 Lbs. is really close to what my 31 FBC weighs when getting launched, not much of a safety factor. With full fuel, a little rain, etc, well over 12K.
Depends on engines etc., but your call.
Depends on engines etc., but your call.
Scott Traenkle
-
- Senior Member
- Posts: 7036
- Joined: Jun 29th, '06, 21:24
- Location: Hillsdale, New Jersey
- Contact:
Re: Hydrohoist
Oliver
Have not seen any of these in operation. They are not in great use here in the States.
Have not seen any of these in operation. They are not in great use here in the States.
1975 FBC BERG1467-315
Re: Hydrohoist
Back before proper lifts, hydro hoists were the going thing. Two floats evacuated by pushing the water out with air to raise. Flooding the pontoons to make the thing sink.
Very maintenance prone.
Very maintenance prone.
Re: Hydrohoist
Olivier- they scare the heck out of me. Have you watched video of how they drop the boat in the water? stern first, not evenly from what I understand.
- Bertramp
- Senior Member
- Posts: 1430
- Joined: Jan 2nd, '09, 14:57
- Location: Sag Harbor, NY Fort Lauderdale, FL
- Contact:
Re: Hydrohoist
What scares me is the thought of a leak in one pontoon .....
1970 Bertram Bahia Mar - hull# 316-1003
1973 Bertram 38 (widebody) - hull# BER005960473
Steve "Bertramp" Kelly
1973 Bertram 38 (widebody) - hull# BER005960473
Steve "Bertramp" Kelly
- Olivier
- Standing Member
- Posts: 40
- Joined: Jun 23rd, '13, 07:18
- Location: Puerto Princesa, Palawan, Philippines
Re: Hydrohoist
The best brand is AIRBERTH from Australia, i saw some in use in Hong Kong and they are great but very very expensive.
It's for that i'm looking for something cheaper and HydroHoist is affordable in second hand. With what i saw there is no
problem with the stern going first in the water because in the same time other part of the hull go in the water, around 72
seconds to release the boat .
Olivier
It's for that i'm looking for something cheaper and HydroHoist is affordable in second hand. With what i saw there is no
problem with the stern going first in the water because in the same time other part of the hull go in the water, around 72
seconds to release the boat .
Olivier
1972 BERTRAM 31 hull number NJZ594940686
Who is online
Users browsing this forum: Bing [Bot] and 372 guests