Bertram 28 fly bridge seating

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
bertram 20
Posts: 108
Joined: Feb 22nd, '08, 09:05
Location: Scituate Ma

Bertram 28 fly bridge seating

Post by bertram 20 »

Finally got to take boat out for shakedown today and realized how awful that stock bench seat on the fly bridge is it is way to low would love to be sitting higher i just wanted to pick your brain or see some pictures of how some of you may have modified your seats. i hate drilling holes i was thinking of using existing mounts and putting aluminum plate across and then mount a pedestal type seats to that any ideas would be helpful thanks
Image
MarkD
Senior Member
Posts: 242
Joined: Aug 19th, '06, 21:24
Location: Darien, CT
Contact:

Re: Bertram 28 fly bridge seating

Post by MarkD »

Bertram20:

My 1988 bench is about the perfect height. I had it extended the full length to sit 4 and made a cut out - indent at the helm about 4 inches deep so that when I am standing up while running, the bench doesn't cut into my calves. It works really well. I am not sure what year you have or the height so ours could be different?

Mark
Yannis
Senior Member
Posts: 3074
Joined: Oct 23rd, '13, 09:41
Location: Athens, Greece

Re: Bertram 28 fly bridge seating

Post by Yannis »

Bertram20,

I agree that the bench is low BUT it is comfortable especially if you place your feet against the corners of the leaning forward space. Also, you can avoid spray by lowering your head and thus be protected by the glass.

There is a pic somewhere of a 28 bridge seating (somewhere in yachtworld I think) modified, so that it has an"L" shape. The short leg of the L is a longitudinal bench that goes from the glass to the ladder, thus allowing for someone, not the cpt, to relax looking backwards. You remove the ledge on the side of the dash and create a leaning surface with the same slope as that of the glass fairing, down to the level of the existing bench and then go aft as much as the side of the fb allows you to. When I saw it it was love at first sight for me. I'll try to find the pic, I think I have it saved somewhere but now from where I am it is not possible. Good luck.
1973 B28 FBC/2007 4LHA STP's - "Phantom Duck" - Hull "BER 00794 1172"
Capt Rex
Posts: 52
Joined: Jun 13th, '11, 09:47
Location: Vessel: Stock Island, Fl; Me: Malibu, CA when not on board

Re: Bertram 28 fly bridge seating

Post by Capt Rex »

My '91 Bertram X'd the bench and put in 2 captains chairs and a built in storage lazarette starboard side (latter also on starboard side) that will lounge one or sit two, but very tight.
User avatar
Hyena Love
Senior Member
Posts: 309
Joined: Jun 30th, '06, 09:54

Re: Bertram 28 fly bridge seating

Post by Hyena Love »

I made the U cut out immediately behind the wheel to keep it from rubbing on my calfs too. Better cushion helps a bunch as well. Still, its not exactly luxury accommodations.

I've seen the bench removed and a big, single cpt. chair installed. The guy that ran Southern Breeze/Xanadu had one on his B28 as I recall.
Post Reply

Who is online

Users browsing this forum: No registered users and 347 guests