OT, speed channels pass time

Bruce · Post by **Bruce** » Aug 22nd, '10, 09:40

Friday night we filmed the drag show on speed channel, Pass Time.

It was a long drawn out ordeal from 9am till 2:30 am.

The best part of the whole thing was after we fired up the car, Kevin did about a 400' burnout that left the cast, crew and contestants with their jaws dropped and had the crowd on their feet cheering.

After backing up to pre stage and a few dry hops, I pulled the chute pins walked around to show Kevin and he had the biggest smile on his face.

He nailed the run and as I was walking back to get the tow truck, the blond T & A on the show came over to me and gave me a high five and said out of all the shows, our car scared her.

Yes I thought, my work was done.

As soon as I get the air date I'll post it.

Charlie J · Post by **Charlie J** » Aug 22nd, '10, 09:43

nice, where did this take place

Harry Babb · Post by **Harry Babb** » Aug 22nd, '10, 10:06

The feeling of SATISFACTION, knowing that the job is complete and well done is something that not many folks ever understand and its something money cannot buy......good for you Bruce

hb

CaptPatrick · Post by **CaptPatrick** » Aug 22nd, '10, 11:06

Cool, Bro.... Give me a call and share the details.

John F. · Post by **John F.** » Aug 22nd, '10, 12:04

I know its NHRA or IHRA racing, and purists look down on it, but I find myself watching Passtime and Pinks now and then. I think mainly because it more regular (and some very talented) guys, rather than the big guys. Let us know the details...

What was your time?

Capt.Frank · Post by **Capt.Frank** » Aug 23rd, '10, 11:45

Can't wait to see the car. We watch it at work and play agaist each other.
Sweet.

Frank

Mike Moran · Post by **Mike Moran** » Aug 24th, '10, 21:04

Bruce great job, we ran a nova here in ct. a few-- years ago and when you do well its a great feeeling of hard work well done also ran a porsche 356 speester super 1500cc at north ct .road track what a rush that was . great job Bruce enjoy ( gear heads know)

scenarioL113 · Post by **scenarioL113** » Aug 24th, '10, 21:15

I love that show. I want my father to run his 49 Olds Coupe on that show. I see so many cars with crazy HP and they run good but I think the Olds is a hard car to predict an ET.

He has an original 454 LS6 from a 70 chevelle (he has had the motor for 39 years) in it and its ALL motor BONE STOCK (motor is in original configuration never been bored and only a 4BBL on it) and 4200 Lbs ZERO aerodynamics.

Wanna play passtime??? LOL!

Bruce · Post by **Bruce** » Aug 25th, '10, 16:06

ZERO aerodynamics

Thats what was so fun back in the day was trying to make a cement truck go fast.

Thats when Detroit iron meant just that, IRON. Not plastic, composites, fiberglass.

It was fun but in drag racing your 15 minutes of fame, comes 6 seconds at a time.

RussP · Post by **RussP** » Aug 25th, '10, 16:52

Cool Bruce! I didn't know you got back into the game. I spent 4 months in the shop building our new fun track car

have fun,
RussP

Buju · Post by **Buju** » Aug 25th, '10, 16:56

Nice ride Russ... But what model Bertram is that towing the Porsche?

Nice gratuitous emblem usage... was think of doin the same to my Ram.

Harv · Post by **Harv** » Aug 25th, '10, 19:40

Good job Bruce,

makes me jealous knowing that my ride has been in storage for over 10 years. Hopefully it will run again soon.

Bruce · Post by **Bruce** » Aug 27th, '10, 16:19

Russ,
You gonna run that down at Moroso? They got a pretty nice road track now.

RussP · Post by **RussP** » Aug 28th, '10, 07:50

We are scheduled to be at PBIR, Road Atlanta and Roebling Road over the next few months. I can't wait 260 to 270 HP in a 2000# car. She is at Franz Blam Racing right now ready for a fresh race engine, gear box and corner balancing. As you know doing this from scrach takes huge time and a huge budget. Linda & I have been going at it for the last few months and I could almost tast it.

RussP

Bruce · Post by **Bruce** » Aug 28th, '10, 14:59

Let me know when you goto PBIR. I'd like to see it run.

RussP · Post by **RussP** » Aug 28th, '10, 16:24

I'll keep you posted.
RussP

Mikey · Post by **Mikey** » Aug 30th, '10, 09:15

Russ,
If you come as far as VA to VIR let me know.
That's our home track and newly restored and getting high marks.

AndreF · Post by **AndreF** » Aug 30th, '10, 09:32

Russ, all this time I thought you were building swim platforms.......ha

Bruce · Post by **Bruce** » Aug 30th, '10, 16:44

260 to 270 HP in a 2000# car

Try 3000 hp in a 1500# car. Its much more fun.

Forget the German crap engine. A 383 small block would make that puppy scream.

Remember, if its not blown, it sucks!

I'll also remind you of an old saying Mike "drag my knee on the ground at 100mph" O reminded me of some time ago.

How do you make a small fortune in racing..............start with a large one!

Get sponsors quick.

mike ohlstein · Post by **mike ohlstein** » Aug 30th, '10, 18:35

The GP bikes today make abour 245 HP and weigh 330 lbs. Not quite the same power to weight ratio, but they also have to corner......

100 mph comes up in a hurry. Second gear and about 3.1 seconds from 0.

Harv · Post by **Harv** » Aug 30th, '10, 19:56

Bruce,

Any updates for the airing of your epsiode of Pass Time?

JeremyD · Post by **JeremyD** » Aug 30th, '10, 20:01

Russ - I just finished building your cars' twin sister

I'm down at Sebring all the time.

Bruce let us know when your time is - I have a large appreciation of a well built car

RussP · Post by **RussP** » Aug 31st, '10, 15:25

Bruce · Post by **Bruce** » Aug 31st, '10, 15:27

jeremy,
Nice car. Was never into imported stuff, but can appreciate anything that goes fast. SIL's dad was into racing those high dollar volkswagens back in the late 80's.

Probably won't know anything about Pass Time for a few months I think. They are the most unhelpfull bunch.

Here's a pic of us running against Joe Jacono's redone Rolling Stoned at Atco back in June.
What it doesn't show was at about 500' they tried to kiss front bumpers.
It was so hot the track was slick as ice.

Many will remember from the 70's that car. Bob Rosetty owns the car and did the refit out of Philadelphia.

bob lico · Post by **bob lico** » Aug 31st, '10, 15:54

bruce the car that comes to mind from detroit with no plastic for zero aerodynamics has to be the buick gran sport around 1985 with twin tubocharged v6 engine . faster then anything that year and it look like a brick going down the track.

Bruce · Post by **Bruce** » Nov 9th, '10, 19:14

Last Tuesday I just found out our segment on pass time got aired after being told is was going to be in Feb, 2011.

It should be on reruns this winter though and I am in the process of getting someone who dvr'd it to get a copy or do a utube and I'll post a link to it.

It apparently was edited down quit a bit, but looked good.

Here's a still from that night I just got.

Rocky · Post by **Rocky** » Nov 9th, '10, 21:48

Cool Bruce, I'll try to catch that rerun sometime. I recently got tickets to top fuel drags here in my hometown Infinion Raceway, for Toyota's congrats on my master diagnostic technician (MDT) status. Those cars you have to be there for to appreciate a 1000hp per cylinder. Eyes watering, passing out from fumes just standing near those things firing up after a 1hour complete gone through engine, and no vvti or 4 valves per cyl here, just very large 2 valves. The trans/carbon clutch setup is amazing also, fried in one run.

Bruce · Post by **Bruce** » Nov 10th, '10, 17:37

Fuel cars are like no other, and neither is the work required between rounds.

coolair · Post by **coolair** » Nov 10th, '10, 22:49

i love the drags its been too long since i've been
nice car
let us know if you get a copy of the race.

bertram31.com

OT, speed channels pass time

OT, speed channels pass time

post subject

Who is online