Hello.
My name is Ryan, the proud new owner of a 1968 bertram 31. Does anyone know of someone that can haul the boat from New Hampshire to Southern Calif? Also, the few people I have talked with need to know the height of the boat. Since I'm in California and the boat is on the east coast....would anyone know that measurement?
Thanks in advance and I look forward to getting involved with this awesome site and learning from you all.
Shipping a 31 from New Hampshire to Ventura, Ca
Moderators: CaptPatrick, mike ohlstein, Bruce
-
- Posts: 6
- Joined: Oct 4th, '17, 12:17
-
- Senior Member
- Posts: 7036
- Joined: Jun 29th, '06, 21:24
- Location: Hillsdale, New Jersey
- Contact:
Re: Shipping a 31 from New Hampshire to Ventura, Ca
Welcome to the board.
I can tell you that it is shown as 12 feet from the top of the windscreen to the chine. You will need to add 3 feet give or take for any additional depth of the hull.
I know there are diagrams some place on this board but I can not find them right now. I thought they were on the old board but don't see them there.
I can tell you that it is shown as 12 feet from the top of the windscreen to the chine. You will need to add 3 feet give or take for any additional depth of the hull.
I know there are diagrams some place on this board but I can not find them right now. I thought they were on the old board but don't see them there.
1975 FBC BERG1467-315
-
- Senior Member
- Posts: 7036
- Joined: Jun 29th, '06, 21:24
- Location: Hillsdale, New Jersey
- Contact:
Re: Shipping a 31 from New Hampshire to Ventura, Ca
Spoke too soon found this.
http://bertram31.com/specs/B31CradleDiagram.pdf
You may need to print it out and blow it up to read the numbers.
http://bertram31.com/specs/B31CradleDiagram.pdf
You may need to print it out and blow it up to read the numbers.
1975 FBC BERG1467-315
-
- Posts: 6
- Joined: Oct 4th, '17, 12:17
Re: Shipping a 31 from New Hampshire to Ventura, Ca
Thank you Tony
Re: Shipping a 31 from New Hampshire to Ventura, Ca
Hey Ryan!
Welcome! Congratulations! Max and his family loved and used the boat and cared for her well! While I don't know of a specific hauling company, you should be able to transport her over land. No worries. Might have to remove the radar arch, but otherwise be good to go!!! You will love her!
Dug
Welcome! Congratulations! Max and his family loved and used the boat and cared for her well! While I don't know of a specific hauling company, you should be able to transport her over land. No worries. Might have to remove the radar arch, but otherwise be good to go!!! You will love her!
Dug
Who is online
Users browsing this forum: Bing [Bot], Sheer Folly and 174 guests