Hydrohoist

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
User avatar
Olivier
Standing Member
Posts: 40
Joined: Jun 23rd, '13, 07:18
Location: Puerto Princesa, Palawan, Philippines

Hydrohoist

Post by Olivier »

Dear all,

Did some of you have used or uses an Hydrohoist SIDE-TIE B model (12000 lbs) for his B31 ?
I need some advices before buying one.
Thanks

http://www.thehulltruth.com/boating-for ... eeded.html
1972 BERTRAM 31 hull number NJZ594940686
User avatar
STraenkle
Senior Member
Posts: 230
Joined: Jun 30th, '06, 07:18

Re: Hydrohoist

Post by STraenkle »

I don't know anything about those lifts, but 12,000 Lbs. is really close to what my 31 FBC weighs when getting launched, not much of a safety factor. With full fuel, a little rain, etc, well over 12K.

Depends on engines etc., but your call.
Scott Traenkle
Tony Meola
Senior Member
Posts: 7036
Joined: Jun 29th, '06, 21:24
Location: Hillsdale, New Jersey
Contact:

Re: Hydrohoist

Post by Tony Meola »

Oliver

Have not seen any of these in operation. They are not in great use here in the States.
1975 FBC BERG1467-315
User avatar
Bruce
Site Admin
Posts: 3789
Joined: Jun 29th, '06, 12:04
Location: Palm Beach Gardens, Fl.

Re: Hydrohoist

Post by Bruce »

Back before proper lifts, hydro hoists were the going thing. Two floats evacuated by pushing the water out with air to raise. Flooding the pontoons to make the thing sink.

Very maintenance prone.
jspiezio
Senior Member
Posts: 882
Joined: Nov 25th, '07, 07:21
Location: Long Island, NY

Re: Hydrohoist

Post by jspiezio »

Olivier- they scare the heck out of me. Have you watched video of how they drop the boat in the water? stern first, not evenly from what I understand.
User avatar
Bertramp
Senior Member
Posts: 1430
Joined: Jan 2nd, '09, 14:57
Location: Sag Harbor, NY Fort Lauderdale, FL
Contact:

Re: Hydrohoist

Post by Bertramp »

What scares me is the thought of a leak in one pontoon .....
1970 Bertram Bahia Mar - hull# 316-1003
1973 Bertram 38 (widebody) - hull# BER005960473
Steve "Bertramp" Kelly
User avatar
Olivier
Standing Member
Posts: 40
Joined: Jun 23rd, '13, 07:18
Location: Puerto Princesa, Palawan, Philippines

Re: Hydrohoist

Post by Olivier »

The best brand is AIRBERTH from Australia, i saw some in use in Hong Kong and they are great but very very expensive.
It's for that i'm looking for something cheaper and HydroHoist is affordable in second hand. With what i saw there is no
problem with the stern going first in the water because in the same time other part of the hull go in the water, around 72
seconds to release the boat .
Olivier
1972 BERTRAM 31 hull number NJZ594940686
Post Reply

Who is online

Users browsing this forum: No registered users and 134 guests