![Image](http://i269.photobucket.com/albums/jj47/Westwater3/Fishing/imagejpg1_zpsbc7c7ba6.jpg)
Half Mold 31
Moderators: CaptPatrick, mike ohlstein, Bruce
Half Mold 31
Pulled the first few parts off the mold this week. The mold had a few spider cracks that transferred to the part but with a little sanding they disappear. The blue proving dye shows the areas with blemishes. The builder said he can do the parts as is for $125 or $175 sanded out, plus shipping. I can arrange shipping with a paid order for those interested. The part on the left has been sanded out, the one on the right is as is out of the mold. Thanks to Steve Kelly for locating the mold and Trip Spinner from Beacon Boats for pulling the parts for us. BH
![Image](http://i269.photobucket.com/albums/jj47/Westwater3/Fishing/imagejpg1_zpsbc7c7ba6.jpg)
![Image](http://i269.photobucket.com/albums/jj47/Westwater3/Fishing/imagejpg1_zpsbc7c7ba6.jpg)
1966 31 Bahia Mar #316-512....8 years later..Resolute is now a reality..Builder to Boater..285 hours on the clocks..enjoying every minute..how many days till spring?
Re: Half Mold 31
I'm in. I know I'm way down the list because I didn't contribute to buying the mold--I was without a B31 at the time. Let me know whenever.
Thanks-
John
Thanks-
John
1968 B20 Moppie - Hull # 201-937
1969 B31 FBC - Hull # 315-881 (sold)
1977 B31 FBC - Hull # BERG1652M77J
1969 B31 FBC - Hull # 315-881 (sold)
1977 B31 FBC - Hull # BERG1652M77J
Re: Half Mold 31
nice
ill take the sanded one
let me know how you want to handle this
thanks steve, bob
ill take the sanded one
let me know how you want to handle this
thanks steve, bob
1968 hull # 316 - 757
-
- Senior Member
- Posts: 269
- Joined: Jun 29th, '06, 13:46
- Location: Hampton Bays, NY
Re: Half Mold 31
Bob,
Me to on a sanded one.
Harry
Me to on a sanded one.
Harry
- Russ Pagels
- Senior Member
- Posts: 513
- Joined: Jun 29th, '06, 18:17
- Location: NC
Re: Half Mold 31
Bob, count me in for a sanded one, I am on the list. But who has the list? Russ
1972 31 FBC 315-141-1226
All that is necessary for evil to succeed
is that good men do nothing.
All that is necessary for evil to succeed
is that good men do nothing.
Re: Half Mold 31
I am not on the list, but would certainly like to buy one. This might be an opportunity to mark them up a bit to say $250 and send the $75 per piece to Capt. Pat?
Maybe a little engraved plaque with length beam, designer, builder and number of hulls produced and an "in support of Bertram31.com"
I was not part of the sourcing group, but those are my thoughts.
Maybe a little engraved plaque with length beam, designer, builder and number of hulls produced and an "in support of Bertram31.com"
I was not part of the sourcing group, but those are my thoughts.
- PeterPalmieri
- Senior Member
- Posts: 2561
- Joined: Nov 12th, '10, 11:26
- Location: Babylon, NY
- Bertramp
- Senior Member
- Posts: 1429
- Joined: Jan 2nd, '09, 14:57
- Location: Sag Harbor, NY Fort Lauderdale, FL
- Contact:
Re: Half Mold 31
Bob....sorry for not getting back to ya.
I will dust off the list and we can go from there.
I will dust off the list and we can go from there.
1970 Bahia Mar - hull# 316-1003
1990 Blackfin 27 - center console
Steve "Bertramp" Kelly
1990 Blackfin 27 - center console
Steve "Bertramp" Kelly
Re: Half Mold 31
Great idea Rocket I had the same thought about a donation to Capt Pat just wanted the sandbox to help set that number. The plaque with hull numbers would be icing on the cake, I don't have a connection for that but if one of the faithful knows of an engraver chime in. Those who are interested pm me your shipping address and I will get a list started along with the original group who helped purchase the mold. The parts will still need prime and paint to match your 31. Hull # 1 will go to Capt Pat. BH
1966 31 Bahia Mar #316-512....8 years later..Resolute is now a reality..Builder to Boater..285 hours on the clocks..enjoying every minute..how many days till spring?
-
- Senior Member
- Posts: 159
- Joined: Oct 5th, '10, 07:58
- Location: Houma, La
Re: Half Mold 31
I'm in also...... Rough, unsanded works for me.
Ray
Ray
1971 Sportfish 314 49 1103
1994 B28 BERF2720L394
1994 B28 BERF2720L394
- mike ohlstein
- Site Admin
- Posts: 2382
- Joined: Jun 29th, '06, 11:39
- Location: So many things seem like no-brainers until you run into someone with no brain.
- Contact:
Re: Half Mold 31
Put me on the list...if I'm not already there.
I'll take it any way I can get it!
Jerry Gomber
Triton II
I'll take it any way I can get it!
Jerry Gomber
Triton II
Jerry, Triton II
Re: Half Mold 31
I'm in, and one of the original investors.
P.M. to follow.
P.M. to follow.
Mikey
3/18/1963 - -31-327 factory hardtop express, the only one left.
The difference between genius and stupidity is that genius has its limits.
-Albert Einstein
3/18/1963 - -31-327 factory hardtop express, the only one left.
The difference between genius and stupidity is that genius has its limits.
-Albert Einstein
-
- Senior Member
- Posts: 6935
- Joined: Jun 29th, '06, 21:24
- Location: Hillsdale, New Jersey
- Contact:
Re: Half Mold 31
I'm in.
How about we figure out ideas for mounting. We can do it ourselves, but the best way, Glue it to a piece of teak, mahogony etc. Ideas are welcome.
If we get a little plaque made up, it can go on the wood right below it.
Harv
Where have you been hiding? I hope all is well. Last we heard from you was when you posted about the accident.
How about we figure out ideas for mounting. We can do it ourselves, but the best way, Glue it to a piece of teak, mahogony etc. Ideas are welcome.
If we get a little plaque made up, it can go on the wood right below it.
Harv
Where have you been hiding? I hope all is well. Last we heard from you was when you posted about the accident.
1975 FBC BERG1467-315
Re: Half Mold 31
The originals issued to dealers were mounted on (get this) black formica covered plywood!! LOL! They also had a small brass plaque under them. I have an original that has lived a rough life.
Rawleigh
1966 FBC 31
1966 FBC 31
Re: Half Mold 31
Post a picture... Some people might want to go the OEM route... Personally, I'd put it on some nice wood... I wonder, how different are the B31 and B46 hulls?!... Can I reasonably successfully pretend it's a B46?!...Rawleigh wrote:The originals issued to dealers were mounted on (get this) black formica covered plywood!! LOL! They also had a small brass plaque under them. I have an original that has lived a rough life.
- CaptPatrick
- Founder/Admin
- Posts: 4161
- Joined: Jun 7th, '06, 14:25
- Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com
Re: Half Mold 31
Beyond both having pointy and blunt ends, as different as cats and dogs...I wonder, how different are the B31 and B46 hulls?!...
Br,
Patrick
Molon labe
Patrick
Molon labe
Re: Half Mold 31
put me on the list for sure
Re: Half Mold 31
Talked with Tripp today at Beacon Boats, he is taking off for a week and will get a dozen ready when he gets back. The guys from the original list who helped purchase the mold will get first run of parts at above listed price plus shipping. To mount the mold to a finished plaque you will have to bond a few blocks to the inside of the mold. The part is 21" long by about 4" tall. Will keep you guys posted on the progress.BH
1966 31 Bahia Mar #316-512....8 years later..Resolute is now a reality..Builder to Boater..285 hours on the clocks..enjoying every minute..how many days till spring?
Re: Half Mold 31
I am not an original investor but would like to participate as well if there is a opportunity. Thanks guys
Mack
1973 B31 "MAKO"
1973 B31 "MAKO"
Re: Half Mold 31
Had some surgeries this year. Been relatively quiet since the Rendezvous. Went to Bermuda in Sept and got T-boned last week so the van is back in the bodyshop.....AGAIN!!Tony Meola wrote:I'm in.
Harv
Where have you been hiding? I hope all is well. Last we heard from you was when you posted about the accident.
Harv
-
- Senior Member
- Posts: 6935
- Joined: Jun 29th, '06, 21:24
- Location: Hillsdale, New Jersey
- Contact:
Re: Half Mold 31
Harv
sounds like the van has a target painted on it.
Sorry to hear abut hte surgery. I know you have been trying to recover from other injuries. Hopefully that was it.
Stay on the board, keep in touch, too many of the old timers are dropping off.
sounds like the van has a target painted on it.
Sorry to hear abut hte surgery. I know you have been trying to recover from other injuries. Hopefully that was it.
Stay on the board, keep in touch, too many of the old timers are dropping off.
1975 FBC BERG1467-315
Re: Half Mold 31
Harv: You must have a bullseye painted on your backsides!! Sorry for the crash, but glad you are unhurt.
Rawleigh
1966 FBC 31
1966 FBC 31
Re: Half Mold 31
Bob-
Count me in. For the mold donation, let me know what the dent was for you guys....if ok with all that contibuted, will add it to the sanbox donation.
Can,t wait to see one In my bar.
Br
Giff
Count me in. For the mold donation, let me know what the dent was for you guys....if ok with all that contibuted, will add it to the sanbox donation.
Can,t wait to see one In my bar.
Br
Giff
Giff
- mike ohlstein
- Site Admin
- Posts: 2382
- Joined: Jun 29th, '06, 11:39
- Location: So many things seem like no-brainers until you run into someone with no brain.
- Contact:
Re: Half Mold 31
I think that we each put in $25.
- Gert van Leest
- Senior Member
- Posts: 314
- Joined: Jan 17th, '11, 16:30
- Location: Warmond, NL
- Contact:
Re: Half Mold 31
I am in !
Women are like boats ,the older they get , the more money and professional help they need to look beautiful.
- Bertramp
- Senior Member
- Posts: 1429
- Joined: Jan 2nd, '09, 14:57
- Location: Sag Harbor, NY Fort Lauderdale, FL
- Contact:
Re: Half Mold 31
I don't have list in front of me, but it was $25 a pop ... I do remember an overseas gentleman kicking in more.
I will dig out the list on the weekend ... I think I actually posted at one point on the site.
Work & life have been crazy, but I will try to address in next few days.
I will dig out the list on the weekend ... I think I actually posted at one point on the site.
Work & life have been crazy, but I will try to address in next few days.
1970 Bahia Mar - hull# 316-1003
1990 Blackfin 27 - center console
Steve "Bertramp" Kelly
1990 Blackfin 27 - center console
Steve "Bertramp" Kelly
Re: Half Mold 31
Steve, I searched the sandbox post and found the original list who chipped in for the mold, most have posted above, 15 guys helped with the purchase. I will haveTripp make the 15. If you guys can let me know if you want sanded or right out of the mold. Here is the list so far: 1. Steve Kelly (?) 2. Ray Wicklund (u) 3. Mike Kennedy (s) 4. Craig McCarville(s) 5. Harry Woods (s) 6.Charlie Johnson (s) 7. Leo Mauricio (?) 8. Mike Ohlstein (?) 9. Ian Upton (?) 10. Tommy Drake (?) 11. Russ Pagels (s)
12. Bob H. (u) 13. Luis (?) 14. John - whaler (u) 15. Gert (?)
u unsanded right out of the mold, S sanded, ? Need to let me know
The rest will be on the second run, about ten so far, just need to let me know sanded or not. If each of you can drop me a pm with your mailing address so I can get the final $ with shipping, when we get to the point that they are ready to ship if you could send me a check for the $ I will get the part shipped to you Asap.
Capt Pat will get the first one sanded out on the house.
I'd like to send Capt. Pat some $ for each order but will leave that up to each guy, I think 31 would be a fitting number.
Trying to keep the cost down so each Bertram brother can hang one on the wall.
BH
12. Bob H. (u) 13. Luis (?) 14. John - whaler (u) 15. Gert (?)
u unsanded right out of the mold, S sanded, ? Need to let me know
The rest will be on the second run, about ten so far, just need to let me know sanded or not. If each of you can drop me a pm with your mailing address so I can get the final $ with shipping, when we get to the point that they are ready to ship if you could send me a check for the $ I will get the part shipped to you Asap.
Capt Pat will get the first one sanded out on the house.
I'd like to send Capt. Pat some $ for each order but will leave that up to each guy, I think 31 would be a fitting number.
Trying to keep the cost down so each Bertram brother can hang one on the wall.
BH
1966 31 Bahia Mar #316-512....8 years later..Resolute is now a reality..Builder to Boater..285 hours on the clocks..enjoying every minute..how many days till spring?
-
- Senior Member
- Posts: 6935
- Joined: Jun 29th, '06, 21:24
- Location: Hillsdale, New Jersey
- Contact:
- Gert van Leest
- Senior Member
- Posts: 314
- Joined: Jan 17th, '11, 16:30
- Location: Warmond, NL
- Contact:
Re: Half Mold 31
Women are like boats ,the older they get , the more money and professional help they need to look beautiful.
-
- Senior Member
- Posts: 159
- Joined: Oct 5th, '10, 07:58
- Location: Houma, La
Re: Half Mold 31
Hey Gert, were your ears burning last night? We were talking about you..... I think your brother Martin will be in my area in the next few days..... We'll take care of him if he shows up. Small world syndrome.
Bob, I sent a PM with my address.
Thanks
Ray
Bob, I sent a PM with my address.
Thanks
Ray
1971 Sportfish 314 49 1103
1994 B28 BERF2720L394
1994 B28 BERF2720L394
- Russ Pagels
- Senior Member
- Posts: 513
- Joined: Jun 29th, '06, 18:17
- Location: NC
Re: Half Mold 31
Bob, sanded please, I sent you a PM with my address. thanks Russ
1972 31 FBC 315-141-1226
All that is necessary for evil to succeed
is that good men do nothing.
All that is necessary for evil to succeed
is that good men do nothing.
-
- Senior Member
- Posts: 47
- Joined: Jul 1st, '10, 15:14
- Location: New Baltimore, NY
Re: Half Mold 31
I'd love to have one-- unsanded is fine. I can PM my address--and let me know what the cost with shipping, plus donation to Captain Pat would be. I have some beautiful oak from a church pew that will make a nice mounting plate.
- Gert van Leest
- Senior Member
- Posts: 314
- Joined: Jan 17th, '11, 16:30
- Location: Warmond, NL
- Contact:
Re: Half Mold 31
Its a small world Ray :)
Women are like boats ,the older they get , the more money and professional help they need to look beautiful.
Re: Half Mold 31
Bob, yes I was an original contributor because I wanted to help keep the half-hull model in the B-31.com family. I already have one, so I will not be placing an order at this time. Thanks to all who have contributed to the effort, whether with your time or your dollars.
Re: Half Mold 31
Tony your pm didn't go through, keeps saying deleted by author. Got the list updated, waiting to hear from Tripp ,will get the unsanded units out first then work on sanded ones. BH
1966 31 Bahia Mar #316-512....8 years later..Resolute is now a reality..Builder to Boater..285 hours on the clocks..enjoying every minute..how many days till spring?
-
- Senior Member
- Posts: 269
- Joined: Jun 29th, '06, 13:46
- Location: Hampton Bays, NY
Re: Half Mold 31
Bob H.,
Had a problem getting a PM through to you. I wanted to confirm I wanted a sanded model and that I was an original investor. Please advise as to the amount and where to send it. My information is as follows: Harry Woods
166D Lynn Avenue
Hampton Bays, NY 11946
Thanks for your efforts in getting this project of the ground.
Harry
Had a problem getting a PM through to you. I wanted to confirm I wanted a sanded model and that I was an original investor. Please advise as to the amount and where to send it. My information is as follows: Harry Woods
166D Lynn Avenue
Hampton Bays, NY 11946
Thanks for your efforts in getting this project of the ground.
Harry
-
- Senior Member
- Posts: 6935
- Joined: Jun 29th, '06, 21:24
- Location: Hillsdale, New Jersey
- Contact:
Re: Half Mold 31
BobBob H. wrote:Tony your pm didn't go through, keeps saying deleted by author. Got the list updated, waiting to hear from Tripp ,will get the unsanded units out first then work on sanded ones. BH
For some reason it will not go.
I will take a sanded hull. I will to PM try again later to get my address to you. Don't know why it will not go to you.
1975 FBC BERG1467-315
- mike ohlstein
- Site Admin
- Posts: 2382
- Joined: Jun 29th, '06, 11:39
- Location: So many things seem like no-brainers until you run into someone with no brain.
- Contact:
Re: Half Mold 31
Sanded, please
-
- Senior Member
- Posts: 6935
- Joined: Jun 29th, '06, 21:24
- Location: Hillsdale, New Jersey
- Contact:
Re: Half Mold 31
Bob H
Thank You got your PM. I tried to reply but it just will not go. Hit reply, typed my message hit send and it just died.
Must be something my system does not like.
Thank You got your PM. I tried to reply but it just will not go. Hit reply, typed my message hit send and it just died.
Must be something my system does not like.
1975 FBC BERG1467-315
Re: Half Mold 31
Tony, your all set pm's went through. Tripp will have ten ready for me next Wednesday, I will pick them up and work on them over the holiday weekend and get them out asap.. Thanks for your patience guys should start to ship them within a couple weeks. BH
1966 31 Bahia Mar #316-512....8 years later..Resolute is now a reality..Builder to Boater..285 hours on the clocks..enjoying every minute..how many days till spring?
Re: Half Mold 31
thanks for the effort and time bob and steve
I think the #31 is a good figure for a donation to the site
I think the #31 is a good figure for a donation to the site
1968 hull # 316 - 757
- Bertramp
- Senior Member
- Posts: 1429
- Joined: Jan 2nd, '09, 14:57
- Location: Sag Harbor, NY Fort Lauderdale, FL
- Contact:
Re: Half Mold 31
I stalled and handed off to Bob .....
He grabbed the ball and ran with it
A good team effort .....
He grabbed the ball and ran with it
A good team effort .....
1970 Bahia Mar - hull# 316-1003
1990 Blackfin 27 - center console
Steve "Bertramp" Kelly
1990 Blackfin 27 - center console
Steve "Bertramp" Kelly
Re: Half Mold 31
Trip had the first batch of seven ready for us, will start getting them sanded and or shipped out next week..Steve sanded or right out of the mold? BH
![Image](http://i269.photobucket.com/albums/jj47/Westwater3/Fishing/imagejpg1_zpsaedf78e9.jpg)
![Image](http://i269.photobucket.com/albums/jj47/Westwater3/Fishing/imagejpg1_zpsaedf78e9.jpg)
1966 31 Bahia Mar #316-512....8 years later..Resolute is now a reality..Builder to Boater..285 hours on the clocks..enjoying every minute..how many days till spring?
Re: Half Mold 31
Man those look incredible Bob, fantastic progress!
Who is online
Users browsing this forum: No registered users and 99 guests