auto pilots revisited
Moderators: CaptPatrick, mike ohlstein, Bruce
- JohnCranston
- Senior Member
- Posts: 737
- Joined: Jul 8th, '06, 17:50
- Location: Spring, TX; Freeport TX
auto pilots revisited
Fellas,
I'm finally ready to buy one. I have about 5"x6" room to flush mount the display. Any input would be appreciated. I don't need anything fancy, just to get from point a to b.
Many thanks.
John.
I'm finally ready to buy one. I have about 5"x6" room to flush mount the display. Any input would be appreciated. I don't need anything fancy, just to get from point a to b.
Many thanks.
John.
I'll never ruin a $50 buzz with a $4 sandwich
- mike ohlstein
- Site Admin
- Posts: 2394
- Joined: Jun 29th, '06, 11:39
- Location: So many things seem like no-brainers until you run into someone with no brain.
- Contact:
Re: auto pilots revisited
Simrad AP22
Pretty bullet proof.
Pretty bullet proof.
- CaptPatrick
- Founder/Admin
- Posts: 4161
- Joined: Jun 7th, '06, 14:25
- Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com
- JohnCranston
- Senior Member
- Posts: 737
- Joined: Jul 8th, '06, 17:50
- Location: Spring, TX; Freeport TX
Re: auto pilots revisited
Thanks,
I've been looking, but can't find the dimensions of the display...please help?
Thanks again.
John.
I've been looking, but can't find the dimensions of the display...please help?
Thanks again.
John.
I'll never ruin a $50 buzz with a $4 sandwich
- CaptPatrick
- Founder/Admin
- Posts: 4161
- Joined: Jun 7th, '06, 14:25
- Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com
Re: auto pilots revisited
Br,
Patrick
Molon labe
Patrick
Molon labe
- JohnCranston
- Senior Member
- Posts: 737
- Joined: Jul 8th, '06, 17:50
- Location: Spring, TX; Freeport TX
- Hyena Love
- Senior Member
- Posts: 309
- Joined: Jun 30th, '06, 09:54
Re: auto pilots revisited
I have a Si-Tex unit with the remote (no in dash display). SP-80/SP-70 series. Its not interfaced with anything. Point the boat in the direction you want to go, and hit the AP button.
At the time of purchase, it was one of the most economical, yet effective, units. Completely satisfied with the purchase.
At the time of purchase, it was one of the most economical, yet effective, units. Completely satisfied with the purchase.
- TailhookTom
- Senior Member
- Posts: 985
- Joined: Jul 3rd, '06, 14:12
Re: auto pilots revisited
If the Simrad autopilot is half as good as the NSS8 I bought -- it is AWESOME! Now I'm thinking about adding a second NSS8 -- its like having 2 computer monitors at work, only better, because I'm not chasing and killing fish there!
Tom
Tom
Re: auto pilots revisited
I have a Raymarine, its a small display, I love it! I know the AP22 is a great machine.
Just another option.
Dug
Just another option.
Dug
Re: auto pilots revisited
Call Howard Rock at 252-441-1360. Marine Electronics of the Outer Banks. He likely has a refurbished AP 22 or can get you a new unit. I got the control head for an AP22 from a local capt. here. Howard checked that out and sold me the remainder of what I needed. Best of all, he was helpful, responsive and reasonable, and he actually answers the phone. He'll will tell you what's what when it comes to Furuno. This is the guy that the Oregon Inlet Capts.(and many others on the East Coast) deal with.
BRUISER
BERG1552M76F-315
Bradley Tiller
BERG1552M76F-315
Bradley Tiller
- JohnCranston
- Senior Member
- Posts: 737
- Joined: Jul 8th, '06, 17:50
- Location: Spring, TX; Freeport TX
Re: auto pilots revisited
Ernest,
I posted the same question a few years ago, and, you told me about your Si-tex...I'm still in the research mode, and might go with the sp80. BBTiller,
I called Howard but it was after hours and he didn't answer...I'll try him tomorrow.
Many thanks, gents.
John.
I posted the same question a few years ago, and, you told me about your Si-tex...I'm still in the research mode, and might go with the sp80. BBTiller,
I called Howard but it was after hours and he didn't answer...I'll try him tomorrow.
Many thanks, gents.
John.
I'll never ruin a $50 buzz with a $4 sandwich
Who is online
Users browsing this forum: Bing [Bot] and 470 guests