scuppers

thereheis · Post by **thereheis** » Feb 10th, '07, 19:00

where can i find the white rubber that fits in the scuppers,they look like the original ones,3"high x 6"long..??
thanks phil

CaptPatrick · Post by **CaptPatrick** » Feb 10th, '07, 19:18

Phil,

Send me the address where you want it sent & I'll send you enough to make a pair...

Br,

Patrick

thereheis · Post by **thereheis** » Feb 10th, '07, 19:33

phil kindla
955 fm 470
bandera texas 78003

thanks capt.

phil

CaptPatrick · Post by **CaptPatrick** » Feb 10th, '07, 19:41

In the envelope & will drop off tomorrow when I go to town...

thereheis · Post by **thereheis** » Feb 10th, '07, 20:03

didn't really want to put the old yellowed ones on with all the new chrom and new paint job.would have looked like a pollander did it ,,,,half ass,,,well not this pollander .went this far so why cheap it out now right ?
thanks again

phil

scot · Post by **scot** » Feb 11th, '07, 09:30

Capt Patrick,

What is the material made from? I used some white rubber...extremely expensive. Picked it up at Blue Water ship store. The UV's "pinked" it out in one month. I was considering going to a black color.

Is there something that won't go pink so fast?

Thanks

CaptPatrick · Post by **CaptPatrick** » Feb 11th, '07, 10:27

Scot,

Pink color on rubber or PVC is usually due to a mold. It usually only occurs in warmer climates & 1:3 bleach:water spray usually keeps at bay.

Check at a local marine supply or hardware store for black neoprene sheeting if you want to go that direction.

Br,

Patrick

JP Dalik · Post by **JP Dalik** » Feb 11th, '07, 10:31

Scot,
The material is the same as the textured rubber on a fighting chair footrest. Murray Products or one of the other manufacture's may be able to get you some.
Also saw some in the Lewis Marine catalog, its called Pyramid mat Fig 4137 on page 746. $46.95 per yard list.

Good luck

Cross · Post by **Cross** » Feb 11th, '07, 12:30

I bought rubber base from Home Depot that is used as baseboard material where sheetrock meets the floor generally on seen commerical jobs. It worked great and I think it was about $3.00.

scot · Post by **scot** » Feb 11th, '07, 18:34

Thanks JP, did you ever sell your gears?

scot · Post by **scot** » Feb 11th, '07, 18:35

Thanks Capt Patrick...I'll sray some on it and see what happens.

JP Dalik · Post by **JP Dalik** » Feb 11th, '07, 19:05

Scot,
The gears went to a rebuilder in Fl. Talked to him once he sent me a check and a bill of lading. Awesome guy. If anyone has to get rid of Cummins parts or good high Horsepower gears this guy pays good money. Send me a pm if you need more info. Recently I called and swapped out a set of exhaust elbows at no charge. Good people.

bertram31.com

scuppers

scuppers

scuppers

scuppers

Who is online