33 rebuild

MarkS · Post by **MarkS** » Apr 12th, '12, 14:54

I have a good friend in Mexico looking to rebuild a 33. He has found some 315's and is now looking for transmissions. My understanding is 1.5:1 is what he needs and he tells me he wants ZF's. Does anyone have a set laying around they want to part with? What is a fair price for said tranny's? Other pointers on this project as alway are welcome.

In Memory of Vicroy · Post by **In Memory of Vicroy** » Apr 12th, '12, 15:39

Mark - I see second hand ZF IRM 220As in B&H for about $2,500 each and new for just over 3. Some of the military surplus places claim new ones under 3.

UV

MarkS · Post by **MarkS** » Apr 12th, '12, 16:05

UV, what's B&H?

In Memory of Vicroy · Post by **In Memory of Vicroy** » Apr 12th, '12, 16:28

Its Boats & Harbors, the commercial marine marketplace. Comes out three times a month and is nothing but display and classified ads for marine related new and used equipment. Its cheap too, something like $17 a year if you just get one issue a month since they tend to repeat a lot of ads over the course of a month. It is the mother lode for good shit usually at non-rec. prices.

www.boats-and-harbors.com

or email them at boatsandharbors@citlink.net

I've been getting it for years and most of the regular advertisers are top of the line companies. Some folks here have had trouble with some used engine brokers lying about the condition of RTO & "rebuilt" engines.

But Allen Machine, which carries a three page ad every week, is the mother lode for stuff like galvanized or stainless cable, shackles, turnbuckles, cleats, etc. I bought some super heavy duty casters from them for something crazy like 12 bucks each that I made a boat dolly out of and some more for $3 I made pot plant rollers for the Bride.

A great read if you like interesting junk.

UV

IRGuy · Post by **IRGuy** » Apr 12th, '12, 17:15

Mark...

I can't help with locating transmissions for your friend, but you can confirm to him that most of us with 315-330 HP diesels in B33s have 1.5 : 1 transmissions and wheels in the 21" Diam by 23" Pitch, or thereabouts. There is lots of discsuuion on these subjects in the B33 forum, if he isn't already visiting there.

Bruce · Post by **Bruce** » Apr 13th, '12, 08:30

MArk,
When you say 315, who's brand?

Cummins would be 1.5:1

Yanmar would be a 2:1 gear box because of the higher RPM.

IRGuy · Post by **IRGuy** » Apr 13th, '12, 09:05

Bruce...

Thanks for adding the Yanmar info.. for some reason I always think Cummins!

MarkS · Post by **MarkS** » Apr 13th, '12, 13:55

Cummins

dougl33 · Post by **dougl33** » Apr 13th, '12, 14:29

His trans should be 1.5:1 and his props should be 3 blade nibral 21x22 with a #5 cup. He'll cruise at 2400rpms and 23-24 knots and he'll top out at 2900+rpms and 28-29 knots. Fuel burn at cruise will be around 20gph.

I know of at least 4 other with this exact set up. He will not be disappointed.

MarkS · Post by **MarkS** » Apr 17th, '12, 09:16

Thanks guys, all quality info!

bertram31.com

33 rebuild

33 rebuild

Who is online