28' Project Boat in Indiantown Marina west of Stuart
Moderators: CaptPatrick, mike ohlstein, Bruce
- Pete Fallon
- Senior Member
- Posts: 1318
- Joined: Jun 29th, '06, 23:10
- Location: Stuart Fl. and Salem, Ma.
28' Project Boat in Indiantown Marina west of Stuart
Guy's
There is a 28' FBC on the hard at Indiantown Marina west of Stuart, where I keep my 31. This has been sitting for at least 7 years, both engines 5.7 L Bluewater Merc are frozen up, hull and glass are all in fair condition, all the hardware and running gear is still there. Needs alot of TLC but looking for 5K more than likely take 3K. Blisters on botton, section of rub rail has popped at starboard bow. Good restoration project if you like Hyena boats.
There is a 28' FBC on the hard at Indiantown Marina west of Stuart, where I keep my 31. This has been sitting for at least 7 years, both engines 5.7 L Bluewater Merc are frozen up, hull and glass are all in fair condition, all the hardware and running gear is still there. Needs alot of TLC but looking for 5K more than likely take 3K. Blisters on botton, section of rub rail has popped at starboard bow. Good restoration project if you like Hyena boats.
1961 Express Vizcaya Hull 186 12-13-61
Dime a dozen. I just sold my diesel motors from my B28 project. I would sell the partially restored hull with numerous upgrades for a a much better deal than the aforementioned, my opinion. $15k in prep/paint, custom pulpit, vinyl/stainless rubrail, strut pads rebuilt, ruddershelves rebuilt, new smoke windshield, new seacocks, bilge pumps, old wiring removed, new head, on and on. Any project would cost you more than its "worth". The economy blows, most people are out of play money, can't afford to use the toys they own already.
A turnkey boat is where its at. Lots of projects available if you want to spend money. If anyone is interested there is a complete, well-wired B28 with twin fuel-injected 350's, aluminum tank, etc available in southern Maryland for less than 5K. I have no financial interest in it. Pm me if interested.
-Joe
A turnkey boat is where its at. Lots of projects available if you want to spend money. If anyone is interested there is a complete, well-wired B28 with twin fuel-injected 350's, aluminum tank, etc available in southern Maryland for less than 5K. I have no financial interest in it. Pm me if interested.
-Joe
B.W. Outrage 18
Restoring B28 w/ Cummins 4BT 150's
Restoring B28 w/ Cummins 4BT 150's
- mike ohlstein
- Site Admin
- Posts: 2394
- Joined: Jun 29th, '06, 11:39
- Location: So many things seem like no-brainers until you run into someone with no brain.
- Contact:
-
- Posts: 108
- Joined: Feb 22nd, '08, 09:05
- Location: Scituate Ma
- TailhookTom
- Senior Member
- Posts: 985
- Joined: Jul 3rd, '06, 14:12
- mike ohlstein
- Site Admin
- Posts: 2394
- Joined: Jun 29th, '06, 11:39
- Location: So many things seem like no-brainers until you run into someone with no brain.
- Contact:
- TailhookTom
- Senior Member
- Posts: 985
- Joined: Jul 3rd, '06, 14:12
There is one on Craigslist not too far from my home -- of course I never believe the description, but if you are interested, I'd be happy to stop and look.
That Baron is pretty -- bet it will go like hell with this motor in it -- 50kt topend?
http://newlondon.craigslist.org/bod/2820110946.html
That Baron is pretty -- bet it will go like hell with this motor in it -- 50kt topend?
http://newlondon.craigslist.org/bod/2820110946.html
Who is online
Users browsing this forum: Bing [Bot] and 411 guests