copper bottom paint

Marlin · Post by **Marlin** » Jul 14th, '10, 19:18

anyone used this type in salt water, we used to use it in fresh water, I think it's the color I want

Richie Rich · Post by **Richie Rich** » Jul 14th, '10, 20:57

Marlin, most marine bottom paints are copper based...what brand/product were you asking about?

Marlin · Post by **Marlin** » Jul 15th, '10, 07:37

no particular brand just a proven name that is smooth to shiny and is copper in color. The boat will spend a lot of time on a lift but also be in the bahamas for weeks at a time and possibly see fresh water, thx

CaptPatrick · Post by **CaptPatrick** » Jul 15th, '10, 07:54

Pettit's Copper Bronze is the only one I know of, but it only recommended for low to moderate fouling waters. This is modified epoxy paint, similar in characteristics to "Trinidad". The primary use is on classic powerboats, where the bronze color matches well with traditional paint colors. The copper content is lower than that of "Trinidad", and its use is recommended only where appearance is the overriding concern.

Carl · Post by **Carl** » Jul 15th, '10, 09:47

Pettits "Vivid" can be mixed to achieve a wide palette of colors. Other then being pricey I have had good feedback with the product.

Richie Rich · Post by **Richie Rich** » Jul 15th, '10, 18:27

Interlux also make Fiberglass bottom coat, which is a good all around non ablative in the bronze color, or their racing version called racing bronze which is harder and slicker than most. I normally use an ablative.

bertram31.com