cabin in vintage B31s

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
User avatar
Bertramp
Senior Member
Posts: 1430
Joined: Jan 2nd, '09, 14:57
Location: Sag Harbor, NY Fort Lauderdale, FL
Contact:

cabin in vintage B31s

Post by Bertramp »

Ok so I have this 1970 Bahia Mar down here in Lauderdale. The cabin has the original white (can't believe I even have the nerve to call it that) carpet on the walls of the V-berth. I could probably do a spary on carpet shampoo and wet vac treatment a few times and clean it up some, but what is a better alternative ?
thanks
1970 Bertram Bahia Mar - hull# 316-1003
1973 Bertram 38 (widebody) - hull# BER005960473
Steve "Bertramp" Kelly
Raybo Marine NY
Senior Member
Posts: 907
Joined: Jan 3rd, '07, 00:28
Location: Lindenhurst, NY
Contact:

Post by Raybo Marine NY »

padded vinyl
User avatar
Tommy
Senior Member
Posts: 1343
Joined: Jun 29th, '06, 13:36

Post by Tommy »

Bertramp,

Rip it out, but be careful 'cause it has mold on the backside that can cause you to get sick. One of the guys on the Board here got real sick with a respiratory ailment from tearing his out without wearing a respirator. I misted mine down before and during removal with a 50/50 chlorox bleach mixture using a home/garden variety pressure sprayer, and I wore a respirator from Lowes/Home Depot. Then I used a sanding grinder to smooth out the adhesive residue before before applying a new treatment...in my case, a nylon "outdoor" carpet.

Tommy
User avatar
John F.
Senior Member
Posts: 2114
Joined: Jun 29th, '06, 07:58

Post by John F. »

I tore mine out and replaced with a indoor/outdoor I bought at Lowe's--rubber-backed carpet. The nicest v-berth I've seen is Dug Stowe's in Alchemy--teak slats/boards. Ask Dug. Next time, that's what I'm doing.
Joef
Senior Member
Posts: 105
Joined: Jul 11th, '06, 13:16

can you paint it?

Post by Joef »

once you strip out the carpet, has anyone faired it out and painted it...does the foam padded vinyl / carpet make a big difference is noise reduction
Raybo Marine NY
Senior Member
Posts: 907
Joined: Jan 3rd, '07, 00:28
Location: Lindenhurst, NY
Contact:

Post by Raybo Marine NY »

we have faired and painted, it is not a pleasant task.
You must be sure to remove all the glue if you wish to paint or gelcoat.
User avatar
JohnCranston
Senior Member
Posts: 737
Joined: Jul 8th, '06, 17:50
Location: Spring, TX; Freeport TX

Post by JohnCranston »

Joef,
My bahia mar's cabin is fared and painted...the whole cabin including headliner...smooth as a baby's butt.
I'll never ruin a $50 buzz with a $4 sandwich
User avatar
bob lico
Senior Member
Posts: 5278
Joined: Jun 29th, '06, 19:22
Location: sayville,long island

Post by bob lico »

i ripped all of that crap out .filthy bacterior ridden,digusting.i puchase a very nice neutral leatherette with thick form backing.just sprayed 3m77 and wrap it all around cutting the excess off under the cushions. very easy job compare to other interior inovations. raybo marine recomended the method years ago and i am very satisfied especially since my grandchildren sleep in there.
capt.bob lico
bero13010473
User avatar
coolair
Senior Member
Posts: 819
Joined: Apr 5th, '09, 10:10
Location: South Houston,tx
Contact:

Post by coolair »

I wanna see what the teak looks like, any pics?
Thanks
Matt
Hull #315 - 854
Raybo Marine NY
Senior Member
Posts: 907
Joined: Jan 3rd, '07, 00:28
Location: Lindenhurst, NY
Contact:

Post by Raybo Marine NY »

leatherette/vinyl= simple spray and wipe maintenance

carpet- holds moisture and may require shampoo once in a while, but it may take a hook better then the vinyl or leatherette.
User avatar
Bertramp
Senior Member
Posts: 1430
Joined: Jan 2nd, '09, 14:57
Location: Sag Harbor, NY Fort Lauderdale, FL
Contact:

Post by Bertramp »

Especially for down here in FLA, where humidity is always an issue .... sounds like the vinyl or leatherette may be the way to go.
Time for a new respirator ..... bringing one south on the plane will only create potential problems.
1970 Bertram Bahia Mar - hull# 316-1003
1973 Bertram 38 (widebody) - hull# BER005960473
Steve "Bertramp" Kelly
User avatar
Dug
Senior Member
Posts: 2256
Joined: Jun 29th, '06, 11:04
Location: Worcester, MA

Post by Dug »

John, thanks for the compliment!

Coolair, what is your email?

D
User avatar
Brewster Minton
Senior Member
Posts: 1795
Joined: Jun 30th, '06, 07:44
Location: Hampton Bays NY
Contact:

Post by Brewster Minton »

I velcro new rug in every other year. Its not perfect but it works. My boat is not shall we say "Bristol".
Post Reply

Who is online

Users browsing this forum: No registered users and 152 guests