Cutlass Dory
Moderators: CaptPatrick, mike ohlstein, Bruce
Cutlass Dory
Bought another 'classic' this season. A Chris Craft Cutlass Dory, cuddy cabin model. It's in really good condition, but I want to 'fine tune' a bunch of things and really make it a pretty boat.
Does anyone have any information on these boats or know where I can get some? Pictures? If so, I'd really appreciate hearing from you.
It has the original 305 cu. in. motor in it, which still runs great. In fact, was out looking for surf scoters today in Gardiner's Bay with it.
Great fishing platform, and alot easier to run alone then my 31.
Thanks.
Bill
Does anyone have any information on these boats or know where I can get some? Pictures? If so, I'd really appreciate hearing from you.
It has the original 305 cu. in. motor in it, which still runs great. In fact, was out looking for surf scoters today in Gardiner's Bay with it.
Great fishing platform, and alot easier to run alone then my 31.
Thanks.
Bill
- In Memory Walter K
- Senior Member
- Posts: 2912
- Joined: Jun 30th, '06, 21:25
- Location: East Hampton LI, NY
- Contact:
My memory of the ChrisCraft Cutlass is of a very pretty, sharp bowed lapstrake hull with a sloping cuddy reminiscant of the Bahia Mar. The hulls were usually dark blue and a single center mounted engine which made the boat very seaworthy. So far, am I correct? If so, it's a perfect boat for fishing Gardner's Bay, as well as all of the adjacent areas. Enjoy! I have admired that boat from way back when it first came out. To ME, it too is a classic. Unlike B-31's, not too many of them still around. Walter
There were at least three variations on that boat... there was the center console model, which was pretty fishable. Then there were two different cuddy designs that I am aware of. One had a Bahia Mar-like design with a pair of seats, one on either side of the motor box. I owned one of these for several years. Then there was another variation where the boat had more of a trunk cabin up front, and you sat on a bench seat right on top of the motor box.
Was a great little boat, but it was lightly constructed and had a tendency to "corkscrew" rock on the drift, and got a lot of people sick. Best thing I can describe it as rocking side to side, and front to back, then combine those two motions. As a bay boat, it's quite well suited.
The plus is that the light weight means it's cheap to run and moves well with the small V8; it should pull down 2 MPGs at 22-25 knots. Not an offshore boat by any stretch, although a much younger version of myself (and my wife) took that boat from Barnegat NJ out to Martha's Vineyard and back one year on vacation.
I did a major rehab on the boat, and have some photos of various stages of deconstruction/reconstruction ... if that's what you are looking for, I can dig them up and either mail copies or scan and post some of them.
Was a great little boat, but it was lightly constructed and had a tendency to "corkscrew" rock on the drift, and got a lot of people sick. Best thing I can describe it as rocking side to side, and front to back, then combine those two motions. As a bay boat, it's quite well suited.
The plus is that the light weight means it's cheap to run and moves well with the small V8; it should pull down 2 MPGs at 22-25 knots. Not an offshore boat by any stretch, although a much younger version of myself (and my wife) took that boat from Barnegat NJ out to Martha's Vineyard and back one year on vacation.
I did a major rehab on the boat, and have some photos of various stages of deconstruction/reconstruction ... if that's what you are looking for, I can dig them up and either mail copies or scan and post some of them.
Not everybody can own a Bertram 31
Email: algillen@yahoo.com
Email: algillen@yahoo.com
The 26 was made in wood, but I am not so sure there was ever a 26 made in Fiberglass. If memory serves me, I think the 26 was available with a single or twin V8s and was a rocket ship with the twins.
Personally, I always admired the wooden version of the 22 in the center console design, with the varnished mahogany console and accents it was more like a piece of functional art.
A lot of people scoffed at plywood lapstrake boats, but they didn't leak on launch and because they were lighter than cedar or mahogany plank, the plywood boats tended to be faster and more economical. Alas, plywood boats just couldn't survive the ravages of time.
Personally, I always admired the wooden version of the 22 in the center console design, with the varnished mahogany console and accents it was more like a piece of functional art.
A lot of people scoffed at plywood lapstrake boats, but they didn't leak on launch and because they were lighter than cedar or mahogany plank, the plywood boats tended to be faster and more economical. Alas, plywood boats just couldn't survive the ravages of time.
Not everybody can own a Bertram 31
Email: algillen@yahoo.com
Email: algillen@yahoo.com
- White Bear
- Senior Member
- Posts: 157
- Joined: Jun 30th, '06, 08:16
- Location: Southold, NY
Cutlass Dory
No. Although I did stop and look at it. My days of wood boats are long gone, ...... well except maybe a Merritt, Scarborough, etc. some day.
That was a pretty boat in Southold and I have wondered where it ended up. Mine is a cuddy cabin model and was in a yard in Hampton Bays. The guy used to run it offshore for tuna and sharks in addition to stripers, etc. inshore.
It turned out to be a great find. My sons and I caught many stripers in the rocks at Plum, Gardiners, Gull, Little Gull, Fisher's and of course Shelter Island this season all on surface poppers or swimmers.
Going to put it in a shed and do some cosmetic work on her this winter after I get back. Looking forward to spending even more time on her next season.
With the 305 she does about 20kts. easily and burns 15 gallons on a r/t fishing trip to Plum is. Can't beat it. One of those boats (like my 31) that I'll never sell.
That was a pretty boat in Southold and I have wondered where it ended up. Mine is a cuddy cabin model and was in a yard in Hampton Bays. The guy used to run it offshore for tuna and sharks in addition to stripers, etc. inshore.
It turned out to be a great find. My sons and I caught many stripers in the rocks at Plum, Gardiners, Gull, Little Gull, Fisher's and of course Shelter Island this season all on surface poppers or swimmers.
Going to put it in a shed and do some cosmetic work on her this winter after I get back. Looking forward to spending even more time on her next season.
With the 305 she does about 20kts. easily and burns 15 gallons on a r/t fishing trip to Plum is. Can't beat it. One of those boats (like my 31) that I'll never sell.
Cutlass Dory
The filter is not close at all. Maybe a different mount. In any event, if it isn't the filter, it's the starter. Had a 23 Mako i/b that I had to put at least 1 starter in each season because of bilge water. Like women, they've never designed the perfect boat yet, although the 31 comes very close. Come to think of it, so does the CC Cutlass Dory.....
-
- Senior Member
- Posts: 269
- Joined: Jun 29th, '06, 13:46
- Location: Hampton Bays, NY
Cutlass Dory
Thanks Harry....Do you know where he keeps it?
-
- Senior Member
- Posts: 269
- Joined: Jun 29th, '06, 13:46
- Location: Hampton Bays, NY
Cutlass Dory
Thanks Harry...No rush
Who is online
Users browsing this forum: Bing [Bot] and 421 guests