RE: Vessel Weight

[Michael P]

I have a 1976 31'Bertram F/B with a half tower.I want to install a boat lift
and need to know the approx. dry weight.
Any information on this vessel would be greatly appreciated.
Thanks Again,
Mike P.

[STraenkle]

do you have diesel or gas, if diesel what type? My 75 FBC with gas is approximatly 12,000

[CaptPatrick]

Michael,

Avg weight is around 12,000 - 13,000 with gear and fuel. You need to install a 18,000 lb capacity lift to give you the acceptable safety margin.

Br,

Patrick

[AndreF]

I built my lift some 3 years ago and in honor of Dave Kosh I'd be happy to answer any questions you might have or send you pictures.

[chris pague]

Andre; I would also like some pics. What have you at the stern and forward for keel support. I can see your bunk pads are much longer and sit out futher to the last strake. Email of post I will copy.
Thanks Chris
PS Happy B Day

[AndreF]

Chris,
I have two 16' pads , right under outside stringers, pre-cut at 23 degrees. They stick out forward but not past the transome in the rear. The pads are mounted to two large aluminum I-beam cross members one forward and one rear. It has sufficient weight so the cables do not get slack in them. There is no keel support, too many thru hulls.