Shift Cables?

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
User avatar
Capt.Frank
Senior Member
Posts: 641
Joined: Jun 29th, '06, 21:20
Location: Kill Devil Hills,NC

Shift Cables?

Post by Capt.Frank »

Is there a better shift cable than the old morse 33 ? Or does it not matter for a B31. Is it worth the money for the extreme cables?
Just woundering

Thanks
Frank
1976 FBC
3208 NA
User avatar
Carl
Senior Member
Posts: 6043
Joined: Jul 5th, '06, 06:45
Location: Staten Island NY

Post by Carl »

The 33 Supreme is a better cable.

Worth the extra????

Yes if you need tight bends
Yes if the install requires tight bends
Yes if you have a second station, they are supposed to have less friction.


All said and done I used the better ones when I added the tower and replaced two cables from the helm (although they worked perfect, the outer sleeve was degraded) Replacing the helm with the better cable...I did not notice a difference, other then being able to snake it thru the boat easier. Then again I have Single lever Dual Purpose shifters so they are not all that EZ to move in the first place.
User avatar
Brewster Minton
Senior Member
Posts: 1795
Joined: Jun 30th, '06, 07:44
Location: Hampton Bays NY
Contact:

Post by Brewster Minton »

I have the same cables for 15 years. A couple shots of CX now and then and there fine.
User avatar
Rawleigh
Senior Member
Posts: 3442
Joined: Jun 29th, '06, 08:30
Location: Irvington, VA

Post by Rawleigh »

I have the same red Morse cables that came with the boat in 1966. Still working perfectly (knock on wood)!!
Rawleigh
1966 FBC 31
User avatar
randall
Senior Member
Posts: 2623
Joined: Jun 29th, '06, 09:29
Contact:

Post by randall »

Rawleigh wrote:I have the same red Morse cables that came with the boat in 1966. Still working perfectly (knock on wood)!!

me too cept one. make sure you tie a repull wire before you remove it.
Joef
Senior Member
Posts: 105
Joined: Jul 11th, '06, 13:16

glendenning

Post by Joef »

hey - i have the old red morse cable, but i've heard the guys at my marina (they build towers for a living) say that glendenning makes a great product that is especially good for tight bends and mulitple stations.
Tony Meola
Senior Member
Posts: 7004
Joined: Jun 29th, '06, 21:24
Location: Hillsdale, New Jersey
Contact:

Post by Tony Meola »

The old red cables I ripped out of my 75 worked and looked just fine. As long as they stay dry inside they should not have a problem.
User avatar
In Memory of Vicroy
Senior Member
Posts: 2340
Joined: Jun 29th, '06, 09:19
Location: Baton Rouge, LA

Post by In Memory of Vicroy »

Tony Athens at Seaboard Marine in CA says he carries a replacement cable that is the cat's meow for far shorter money than the Glendinning, and knowing Tony, it probably top notch. The boatyard boneheads that replaced the genset on AJ after Katrina put one of the mounts right on top of the port shift and throttle cables and they are very stiff. Guess I'll jack up the genset and see what's up this winter, if we ever have one.

UV
User avatar
Capt.Frank
Senior Member
Posts: 641
Joined: Jun 29th, '06, 21:20
Location: Kill Devil Hills,NC

Post by Capt.Frank »

The red ones came out still work but,one end is broken and the other has started to rust on the inside of the end. The old ones were from 76. I think so should be ok with the Red. Just checking first. I know with a tower you realy need good ones.

Thanks
1976 FBC
3208 NA
Post Reply

Who is online

Users browsing this forum: Google [Bot] and 64 guests