PVA to finish cure

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
User avatar
luis
Senior Member
Posts: 166
Joined: Jun 25th, '07, 03:57
Location: Lisbon, Portugal

PVA to finish cure

Post by luis »

Today a friend told me that when he wants to finish a patch of polyester resin, (final cure) he just "paint" with polyvinyl alchool (PVA) when is done and this makes that the resin stops beeing tacky and after 24 hours he removes the PVA skin and is ready for priming. I know that he already made lots of repairs on his boat but, I like to have a second (first for me) opinion from friends here.
Thanks
User avatar
CaptPatrick
Founder/Admin
Posts: 4161
Joined: Jun 7th, '06, 14:25
Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com

Post by CaptPatrick »

Luis,

Yes, it's a legitimate technique.


The reason that most gelcoats remain tacky after they cure is that they usually do not contain any wax in the formula. You can also add a product to the wet gelcoat called "surfacing wax". Once wax has been added to gelcoat, the wax migrates to the surface during the cure and blocks air from contacting the gelcoat.

If unwaxed gelcoat cures in contact with air it will remain tacky almost indefinitely. That can be a good thing when you're applying more than one coat at intervals. A bad thing if you are applying a single/last coat and intend to sand it after it cures.

The other way to block air is cover the freshly applied gelcoat with PVA. This is usually done with a fine nozzel spray gun and about 90 psi. Making multiple passes of highly atomized PVA over the fresh gelcoat will create an air barrier. This does have to be applied while the gelcoat is still wet and thereby can be a tricky application without disturbing the gelcoat.

I prefer to use surfacing wax, adding about a cap full per quart of gelcoat.

PVA is water soluble and can be cleaned off with warm soapy water. The surfacing wax needs to be removed with naphtha before sanding.
Br,

Patrick

Molon labe
User avatar
Bob H.
Senior Member
Posts: 1279
Joined: Jul 10th, '06, 19:49
Location: Rehoboth, Mass.
Contact:

Post by Bob H. »

Capt. Pat. Is PVA purple in color? I have seen gelcoat sprayed with a purple material then wet sanded and buffed till done. Thanks BH
1966 31 Bahia Mar #316-512....8 years later..Resolute is now a reality..Builder to Boater..285 hours on the clocks..enjoying every minute..how many days till spring?
User avatar
CaptPatrick
Founder/Admin
Posts: 4161
Joined: Jun 7th, '06, 14:25
Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com

Post by CaptPatrick »

Bob,

Not sure what the purple stuff is... All of the PVA I've ever seen is green. Of course the only brand I've used is Partall, and some one else may produce it in another color.

Image
Br,

Patrick

Molon labe
Thums Up
Senior Member
Posts: 181
Joined: Jul 20th, '06, 07:58
Location: New Jersey
Contact:

Post by Thums Up »

I have seen people use a special purple dye layer for fairing the hullsides. Maybe that is what you saw.
http://Www.GT-lures.com" onclick="window.open(this.href);return false;
Post Reply

Who is online

Users browsing this forum: No registered users and 95 guests