Repower is complete

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
Bill Mckinnon
Senior Member
Posts: 117
Joined: Jun 29th, '06, 13:17
Location: Charleston SC

Repower is complete

Post by Bill Mckinnon »

Today was a great day. Commissoned the engines today. Boat performed real well. We are getting 32 knots wot with the boat loaded. Have a few cosmetic things to do. Yard did a great job and were easy to work with. Link below of sea trial. It is a short video

Captain Bill McKinnon
Charleston SC

http://www.rockvillemarine.com/projects/8
User avatar
Skipper Dick
Senior Member
Posts: 330
Joined: Jun 29th, '06, 08:22
Location: Cape Coral, Florida
Contact:

Post by Skipper Dick »

Bill,
The inside of that tank looked very close to the same as the inside of mine and I don't ever recall putting gas in it that had ethanol. I feel much better with the new one in and secure.

Dick
1983 Bertram 28 FBC w/300 Merc Horizon
User avatar
Harry Babb
Senior Member
Posts: 2354
Joined: Jun 30th, '06, 21:45
Location: Fairhope Al
Contact:

Post by Harry Babb »

Congratulations......looks really good

Harry
hb
User avatar
scot
Senior Member
Posts: 1470
Joined: Oct 3rd, '06, 09:47
Location: Hurricane Alley, Texas
Contact:

Post by scot »

Nice clean installation. It won't take long to get anywhere at 32kts. Congradulations.
Scot
1969 Bertram 25 "Roly Poly"
she'll float one of these days.. no really it will :-0
User avatar
AndreF
Senior Member
Posts: 711
Joined: Jun 29th, '06, 09:53
Location: Baton Rouge, Louisiana
Contact:

Post by AndreF »

congratulations!
I'm proud for you!
I'm not sure but indecision may or may not be my problem.

"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." - George Orwell

1981 FBC BERG1883M81E
Bill Mckinnon
Senior Member
Posts: 117
Joined: Jun 29th, '06, 13:17
Location: Charleston SC

Thanks

Post by Bill Mckinnon »

Want to say thats to all the guys on here esp. Capt Pat. After years of watching all the information here and all the good tips made the process a whole lot easier. And the extra speed is a bonus since it is a forty mile plus run to the good water here. Looking forward to getting the boat back on the tournament circuit. Anthony Black and is staff at Rockville Marine were great to work with ( He also did the repower on Old School). Any one comes this way will be happy to take them for a ride.

Thanks

Captain Bill McKinnon
Charleston SC
jspiezio
Senior Member
Posts: 882
Joined: Nov 25th, '07, 07:21
Location: Long Island, NY

Post by jspiezio »

Nice numbers on that run. Good luck with her.
User avatar
John F.
Senior Member
Posts: 2114
Joined: Jun 29th, '06, 07:58

Post by John F. »

Nice job. She sure looks great running.
User avatar
JeremyD
Senior Member
Posts: 291
Joined: Jan 20th, '09, 09:36
Location: ST. PETE, FL

Post by JeremyD »

Very nice - clean install - great looking boat - and she looks like she is riding higher too - I'm guessing those engines are quite a bit lighter. very very nice.
1977 B31 (315 Cummins) Build thread --->https://www.thehulltruth.com/boating-ho ... model.html
2010 Key West Bay Reef | 150 Yamaha
1986 Bertram 28 260 Mercruisers [SOLD]
charlie falkenstein
Senior Member
Posts: 83
Joined: Jul 26th, '06, 18:10
Location: mt. laurel n.j.

Post by charlie falkenstein »

great ride! good luck!enjoy it!
User avatar
dougl33
Senior Member
Posts: 574
Joined: Jun 29th, '06, 11:21
Location: Marblehead, MA

Post by dougl33 »

It never fails to amaze me how flat the wake is on a Bertram running at true planing speeds. My 33 is the same way once its over 20 knots. Thank god for diesels.
Regards,

Doug L.
User avatar
bob lico
Senior Member
Posts: 5278
Joined: Jun 29th, '06, 19:22
Location: sayville,long island

Post by bob lico »

do you intend to put any kind of tower on her?radar arch with soft top or enclosure with hardtop?
capt.bob lico
bero13010473
Bill Mckinnon
Senior Member
Posts: 117
Joined: Jun 29th, '06, 13:17
Location: Charleston SC

Top

Post by Bill Mckinnon »

I have a soft top for in and is already back on. Just have to clean up and a little touch up painting to do. Will keep all of you posted

Capt. Bill
Post Reply

Who is online

Users browsing this forum: Google [Bot] and 292 guests