boat cover

randall · Post by **randall** » Mar 4th, '09, 17:35

over a foot of snow and not a flake on the boat. this is a good system

CaptPatrick · Post by **CaptPatrick** » Mar 4th, '09, 17:44

Brrrrrr... Sure glad that's your house and not mine Randy. I just finished shooting some 3 part clear coat in the cabin of Hancock's B31. A bit breezy, but 84Âº & 29% humidity here.

randall · Post by **randall** » Mar 4th, '09, 17:57

hell it'll be 50 this weekend and springs right around the corner. i cant believe im so busy i cant enjoy it....this being an adult thing sucks....at least i waited till i was 60

you got to admit....its pretty

CaptPatrick · Post by **CaptPatrick** » Mar 4th, '09, 18:19

Do gotta' admit....

In Memory Walter K · Post by **In Memory Walter K** » Mar 4th, '09, 20:22

Randy-I swear we had much more only a couple of miles away! Walter

randall · Post by **randall** » Mar 4th, '09, 20:33

it compacted about a third once the sun got on it for a few days. i'd call it about 13 inches here as measured up against the slider.

gplume · Post by **gplume** » Mar 4th, '09, 21:25

Ditto hear in RI....say Randall did you get out surfing. My son said it was great.

Buju · Post by **Buju** » Mar 4th, '09, 21:47

Best boat cover... ever.
Didn't this start out as a single line tied off betweeen two oaks, with the tarp draped over it, and tied off under the boat?
Gotta admit that I've used variations of your idea for a number of things around here. Simple & effective, what more does a guy want?

randall · Post by **randall** » Mar 4th, '09, 22:21

giff....i would have gone snowboarding but i have two shows next month and im just workin. i heard the waves were good on sunday.

buju....i think i got it perfected now.

Buju · Post by **Buju** » Mar 5th, '09, 09:48

i think i got it perfected now.

Perhaps... but the simplicity factor has diminished quite a bit... not that it's turned into brain surgery by any means.
What did you want to improve on, The vertical openings? What about lashing the gromets together with bungee ball ties?

or better yet, plastic zip strips?

randall · Post by **randall** » Mar 5th, '09, 10:26

it took less than an hour to erect. all the seams are retaped and not one grommet has pulled out. the bottom is bungeed to cinder blocks. front and back are zip tied. the single best thing is i can convert it to an open end A frame in less than ten minutes. i have easy winter access over the transom. so far it has withstood 60+ winds a number of times....bends but dosent break. the 4 piece frame work is bolted together so its completely reusable.

Buju · Post by **Buju** » Mar 5th, '09, 10:37

i think i got it perfected now

I think you're right.

Bertramp · Post by **Bertramp** » Mar 5th, '09, 11:31

Randall ...
Is that picture from the East end of LI ?
If yes .... did I meet you a few years back in Sag Harbor ? ... you were looking at a tuna tower on an old 45 Hatteras for a friend of yours.

Bertramp ....aka Steve Kelly

randall · Post by **randall** » Mar 5th, '09, 12:17

that was me....the friend was thudd...the picture is in springs on tuesday

Bertramp · Post by **Bertramp** » Mar 5th, '09, 20:58

I still have the 45 Hatt ... it's in Sag. Tower is gone and I painted it. I moved to FLA in July of 2007 and now miss the B31 that I had 10 years ago ... so I'm trying to pick one up for down here. Economics being as they are ... I'm looking to do it "priced right" and to take advantage of being in FLA and close to the folks that built them originally and may be looking for work at better than East End labor prices.

Bertramp · Post by **Bertramp** » Mar 5th, '09, 21:26

This is in FLA and is what I want to replace with a B31. Diesel 24 Topaz.
http://www.samsmarine.com/photopost/sho ... ppuser=275

randall · Post by **randall** » Mar 5th, '09, 22:39

cool boat...but not a 31

Bertramp · Post by **Bertramp** » Mar 6th, '09, 09:42

agreed ... times 2. Would like to sell Topaz BEFORE buying a B31... but heart is fighting a very tough battle against brain.

Buju · Post by **Buju** » Mar 6th, '09, 09:45

That little diesel Topaz is pretty damn nice. Ideal FL boat...
Whats the power?
Asking price?

steve miller · Post by **steve miller** » Mar 11th, '09, 21:42

Buju,
I saw it on the swap & sell board; Cummins 6bt 210. If I hadn't just bought another boat, this little Topaz would have tempted me. Nice! And in this economy, might go for less than it's worth.

Bertramp · Post by **Bertramp** » Mar 12th, '09, 09:35

It's a Cummins 6BT - 210hp.
Burns NO fuel ... cruise at 17kts ... T-Top, lean post, for FLA is very good, because you aren't running 70 miles to the canyon to fish. Very stable with the engine (and a hefty engine) smack dab in the center of the boat. A reasonable offer will buy someone a boat ... and the dockage thing still stands.
bertramp1@aol.com

I had a 31 before when I lived in NY. Sold it, because it could be "cramped" when it's cold out and you're overnighting. I can think of NO better boat to own in FLA !

Bertramp · Post by **Bertramp** » Mar 12th, '09, 09:39

ask is 17k ... but in this economy ... make an offer. As for Steve from Block Island ... I'm originally from Sag Harbor ... boat would be great for gardiners bay. I can work with folks in Northeast for the shipping.

gplume · Post by **gplume** » Mar 17th, '09, 22:22

Took a bit more than an hour (like a good part of a day working solo)...but all winter with tons of snow, and not a drop inside. Shrink wrap is the only way to go if you have a tower....Plus the heat gun is fun to play with (melts snow pretty well).

bertram31.com

boat cover

boat cover

24 TOPAZ

Who is online