I am considering not spalshing my boat for this season--it is currently shrink wrapped since last October---not sure if it should be uncovered for the summer ---I am worried about mold, condensation, and imron paint-does anybody have expierence with long term storage?
Boat is located on Long Island, NY.
SUMMER STORAGE
Moderators: CaptPatrick, mike ohlstein, Bruce
Craig,
Buy one or two of those solar powered vent fans you see on some boat hatches, and put them into the shrink wrap. That will draw air in and through the enclosure on a constant basis. I started doing this a couple years ago for my shrink wrap and it has made a huge difference.
You may consider enlarging the vents also. I bought dryer vent hose this year, and cut it to a scoop shape, and taped in over the vent holes with shrink wrap tape. That allowed me to open up the holes to be 2-3 inch size without water intrusion vs. the 1" holes the yard put in.
Dug
Buy one or two of those solar powered vent fans you see on some boat hatches, and put them into the shrink wrap. That will draw air in and through the enclosure on a constant basis. I started doing this a couple years ago for my shrink wrap and it has made a huge difference.
You may consider enlarging the vents also. I bought dryer vent hose this year, and cut it to a scoop shape, and taped in over the vent holes with shrink wrap tape. That allowed me to open up the holes to be 2-3 inch size without water intrusion vs. the 1" holes the yard put in.
Dug
- CaptPatrick
- Founder/Admin
- Posts: 4161
- Joined: Jun 7th, '06, 14:25
- Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com
Craig,
Don't leave it wrapped... The mold & mildew is combatable, but moisture between the shrink and Imron, along with summer heat, WILL cause you a world of grief. The additional maintenance of an uncoverd boat isn't anywhere near as expensive as paint repairs. Better safe than sorry...
Br,
Patrick
Don't leave it wrapped... The mold & mildew is combatable, but moisture between the shrink and Imron, along with summer heat, WILL cause you a world of grief. The additional maintenance of an uncoverd boat isn't anywhere near as expensive as paint repairs. Better safe than sorry...
Br,
Patrick
Capt Patrick,
How about if you use a breathable kind of fabric? like a light canvas, I was think about the same for my boat state side? Thanks!
How about if you use a breathable kind of fabric? like a light canvas, I was think about the same for my boat state side? Thanks!
http://Www.GT-lures.com" onclick="window.open(this.href);return false;
- In Memory of Vicroy
- Senior Member
- Posts: 2340
- Joined: Jun 29th, '06, 09:19
- Location: Baton Rouge, LA
- CaptPatrick
- Founder/Admin
- Posts: 4161
- Joined: Jun 7th, '06, 14:25
- Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com
Breathable fabric would be OK, but anywhere moisture can be trapped against paint, or sometimes even gelcoat, blistering can occur..,Thums Up wrote:Capt Patrick, How about if you use a breathable kind of fabric? like a light canvas, I was think about the same for my boat state side? Thanks!
Br,
Patrick
Who is online
Users browsing this forum: No registered users and 152 guests