Bertram 31 on a cradle

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
User avatar
Capt. Mac Creech
Senior Member
Posts: 66
Joined: Jun 29th, '06, 19:21
Location: Pensacola, Fl.

Bertram 31 on a cradle

Post by Capt. Mac Creech »

It's been a while guys, When the new site started I wasn't smart enough to log on so I've just been lurking. I need sone openions on keeping Jaded Lady on a rack on the hard. On of the dry storage marinas has a forklift big enough to lift her. Seems to me like the way to go. Has anybody had any problems or concerns doing this? Thanks in advance and will be more active now.
User avatar
In Memory Walter K
Senior Member
Posts: 2912
Joined: Jun 30th, '06, 21:25
Location: East Hampton LI, NY
Contact:

Post by In Memory Walter K »

Mac-Jaded Lady is one of the heavier hulled B-31's. No? Do you mean putting her on a rack or blocking and bracing her up on the hard? Up north where we are, they fork lift and rack mostly outboard boats, but I don't remember ever seeing a diesel powered boat on a rack. They don't seem to have the proper hull supports and ability to customize for heavyweights. Good to have you back! Walter
User avatar
RussP
Senior Member
Posts: 260
Joined: Jun 29th, '06, 15:51
Location: Jensen Beach Fl
Contact:

Post by RussP »

Mac we have fork lifts that'll hoist 40'+ sportfish/bubble yachts at Logerhead marina. They dry store them on racks. One problem you may run into is the transducr placment.

RussP
KAHUNA 1963 Sportfish
User avatar
Bruce
Site Admin
Posts: 3789
Joined: Jun 29th, '06, 12:04
Location: Palm Beach Gardens, Fl.

Post by Bruce »

Not a problem. Just Pulled Zero Cavity out today and loaded on a trailer with a 22,000lb fork lift.

Because of the dead rise and props the best place to lift a 31 is all the way out to the sides. Plus no one mounts a transducer out that far.
User avatar
Tommy
Senior Member
Posts: 1343
Joined: Jun 29th, '06, 13:36

Post by Tommy »

Welcome back Mac, we missed you. Wasn't your "Jaded Lady" the same one that was originally owned by Dick Bertram's sister?

Tommy
User avatar
Rawleigh
Senior Member
Posts: 3444
Joined: Jun 29th, '06, 08:30
Location: Irvington, VA

Post by Rawleigh »

Mac: Good to hear from you! How is Jeremy? I have a PDF of the original Bertram cradle diagram if you need it.
Rawleigh
1966 FBC 31
User avatar
JP Dalik
Senior Member
Posts: 1317
Joined: Jun 30th, '06, 21:03
Location: Pt. Pleasant NJ
Contact:

Post by JP Dalik »

Seen a couple on the top racks fishing out of Jupiter. Looks like the way to go. High and dry- a good thing when the owner is not around
KR


JP
1977 RLDT "CHIMERA"
User avatar
Dug
Senior Member
Posts: 2256
Joined: Jun 29th, '06, 11:04
Location: Worcester, MA

Post by Dug »

Hey Mac!

Good to hear from you again!

I heard about you from the Hunt guys at the Boston Show. My dad has a 36', so if we can answer any questions, or you want a ride when she is wet again, just say the word.

Chris is a great guy. He has been very good to my father.

Dug
User avatar
Capt. Mac Creech
Senior Member
Posts: 66
Joined: Jun 29th, '06, 19:21
Location: Pensacola, Fl.

Post by Capt. Mac Creech »

Good to hear from you guys, I discussed with the marina manager about lifting her with the forks way outboard and he said they would check all the thru hulls and build the rack to fit. I think I,m going to do it, beats bottom jobs and hurricanes. Tommy, She was built for Mr. Bertrams sister in law. I sent you the articles on her a couple years ago.
User avatar
kellysmall
Senior Member
Posts: 56
Joined: Jul 3rd, '06, 08:07
Location: Pensacola, FL

Post by kellysmall »

Mac,
Picking my boat up on the outboard sides has worked great. I know it's only a B25, but with the props and rudders I think I run into the same issues you'd have. Never had any problem storing mine on a rack either. Go over to Day Break and take a look at how mine sits on its rack if you need any ideas. By the way, I still have your trailer at my parents' house whenever you need it back.

-Kel
User avatar
Capt. DQ
Senior Member
Posts: 1025
Joined: Jun 29th, '06, 11:18
Location: P'cola, FL

Post by Capt. DQ »

Mac no problem, you all gonna move to Daybreak Marina or where from Island Cove? I have the Short Circuit over @ Venice Marina till the middle of March, doing some wally fishing on weekends when weather permits.

DQ
1967 Hull #315-605 FBC ---<*)((((><(
"IN GOD WE TRUST"
'Life may be the party we hoped for...but while we are here we might as well fish'!
User avatar
nestorpr
Senior Member
Posts: 131
Joined: Jul 24th, '06, 11:40
Location: Space Coast, Melbourne

Post by nestorpr »

I'm not that savvy on inboards so I have a question, I thought the shaft packing needed to be constantly wet or it would deteriorate. Wouldn't this happen on a boat out of the water for a long time or are the new shaft logs impervious to that?
Looking for my next boat!
User avatar
In Memory of Vicroy
Senior Member
Posts: 2340
Joined: Jun 29th, '06, 09:19
Location: Baton Rouge, LA

Post by In Memory of Vicroy »

Not an issue with the new packing materials such as GFO or with the dripless seals.

UV
thereheis
Senior Member
Posts: 244
Joined: Jul 1st, '06, 05:37
Location: bandera / port aransas tx
Contact:

31on dry stack

Post by thereheis »

i have had the THERE HE IS on a cradle in a dry stack ( ground level)all winter they had no prob lifting it ...had to make a few adjustments on cradle ,but nothing major...summer time is a coming and fixing to get it wet pretty soon ,,,,,

phil
User avatar
Tommy
Senior Member
Posts: 1343
Joined: Jun 29th, '06, 13:36

Post by Tommy »

Mac,

Yes, I have the articles in my notebook and have shared them with some other folks; I was just a little rusty on whether it was Dick Bertram's sister or his sister-in-law. I made the post so the rest of the gang could appreciate the history of your boat. Glad to have you back on board.

Tommy
User avatar
Capt. Mac Creech
Senior Member
Posts: 66
Joined: Jun 29th, '06, 19:21
Location: Pensacola, Fl.

Post by Capt. Mac Creech »

Doug, Talking to the one accross from Daybreak, I think it's Harborview. One thing I had not thought of was the stuffing boxes drying out, Something to consider. Kelly, Sorry about not getting the trailer, Will try soon.
User avatar
Capt. DQ
Senior Member
Posts: 1025
Joined: Jun 29th, '06, 11:18
Location: P'cola, FL

Post by Capt. DQ »

Mac,

If your talking about on the rack just over the winter, you should not have a problem. Just repack them every 2-yrs to be safe. You & Jeremy should bring the Jaded Lady over to Venice for UVI 8 & 1/2 @ the end of July, look @ the UV post and sign up.
I'am going to see if Kenny on the Reel McCoy will come also. Get the P'cola gang fishing on over, I think Kelly signed on too.

DQ
1967 Hull #315-605 FBC ---<*)((((><(
"IN GOD WE TRUST"
'Life may be the party we hoped for...but while we are here we might as well fish'!
Keysfishn
Posts: 6
Joined: Feb 23rd, '08, 08:48
Location: Florida Keys

Bertram on a Cradle..

Post by Keysfishn »

Make sure your trim tabs are up before they lift with a fork!!
Steve Washington
Post Reply

Who is online

Users browsing this forum: No registered users and 42 guests