Adding a Simrad auto pilot this month and I need some input as to which pump to use, the 80 or 160. The boat is a 1970 b-31 with 6 cyl. Cummins and Capt. Pats oversized rudders, it also has Hynautic Steering. The tech I am dealing with is concerned that by only using a 80 pump the system will not be able to perform the hard-over to hard-over with-in the correct period of time. He has told me that I can save 500.00 by using the smaller 80 pump but his concerned is that it may be borderline too small.
Thanks to all,
Dan
Autopilot Pump Question
Moderators: CaptPatrick, mike ohlstein, Bruce
Unless you have a huge ram and lines, the 80 pump is fine on boats up to 35/36' especially with Pat's over sized rudders if installed correctly.
It's the only one I've used on that size boat and the last 31 I did used that pump.
There should be less than 200 bucks between the costs of the two pumps.
It's the only one I've used on that size boat and the last 31 I did used that pump.
There should be less than 200 bucks between the costs of the two pumps.
Who is online
Users browsing this forum: Google [Bot] and 34 guests