Howdy Boating on the cheap

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
User avatar
In Memory of Vicroy
Senior Member
Posts: 2340
Joined: Jun 29th, '06, 09:19
Location: Baton Rouge, LA

Howdy Boating on the cheap

Post by In Memory of Vicroy »

Well, took AJ for a short ride on the Tickfaw this morning to the one & only fuel dock we have left and filled her with diesel....$2.69....she took 30.2 gallons...was writing that in the log book and noticed the last time I filled up was Nov. 26, 2006, some 56 gallons....I got this Howdy Boating down to a science.....TSL a few times a year is a bargain vs. what I used to do.

Eddy G. & his gal Debbie came by the camp yesterday and visited with me & the Bride for a while in his really pretty Hyena Boat before they went to a crazy coonass party a block away that a local doc has every year. Eddy's "Gotta Go" is the nicest Hyena Boat around, new 240 Yannies, may have to invent a new name for Hyena Boats of that quality.....

Summer is here with a vengance here in coonassland....high 90s for the next two or 12 weeks....But ole AJ gave me a 27 kt breeze in my face this morning with a full tank...all is well. And ask me for my Boston Butt pork roast recipe, cause we did 2 yesterday and they were (still are, leftovers).

UV
User avatar
RussP
Senior Member
Posts: 260
Joined: Jun 29th, '06, 15:51
Location: Jensen Beach Fl
Contact:

Post by RussP »

Wow, 30 gal's in 7 months not bad. last week I noticed we were sitting pretty high in the chines and headed right to the fuel dock and took on 150 gallons in a 170 gallon tank. Linda & I put on almost 3000 miles since the diesel repower according to the GPS. With no kids to worry about were going to burn up as many dead dinosaurs as we can till were too old to leave the dock. Today was an amazing day at the inlet sandbar, beautiful blue warter on the incoming tide and 18 boat beers, gota love life.

RussP
KAHUNA 1963 Sportfish
User avatar
In Memory of Vicroy
Senior Member
Posts: 2340
Joined: Jun 29th, '06, 09:19
Location: Baton Rouge, LA

Post by In Memory of Vicroy »

Russ, good deal....I can tell you & Linda really miss Oregon. Tell Linda I'm reconsidering her disqualification in the UVI where she caught the blue marlin. If the Statute of Limitations has not run yet, she may be in the money....but tell her not to clear a place on the shelf for it just yet.

Yeah, love that cheap Howdy Boating....might not even change the oil in the Cummins for a few years....someone said here it's not the hours, but the age on the oil....damn, dat oil was in de ground a loooooong time before she was pumped out, cher, and did not go bad...what ya'll think....sure, run the boat now & then to get the water out of the oil, but do we really need to change it every year? My 21 KW genset has a 16 qt. oil pan and has the same oil in it I put 7 years ago, 150 hours on a 1,000 oil change interval....oil looks, smells, & feels new....Shell Rotella T 15w40...good stuff.

UV
IRGuy
Senior Member
Posts: 1767
Joined: Jun 29th, '06, 07:48
Location: Wilmington, NC

Post by IRGuy »

You guys are enjoying yourselves entirely too much!
User avatar
JohnCranston
Senior Member
Posts: 737
Joined: Jul 8th, '06, 17:50
Location: Spring, TX; Freeport TX

Post by JohnCranston »

UV

How you doing buddy? Thanks for all your help in the past. You are a great guy. Reel Cowboy will be painted in a month or so; then I will post some pics. I am looking forward to another UVI.

Still looking at engine options. After that half tower/tower + Radar arch; I do not know ... but I am sure that everything will fall into place.

John
I'll never ruin a $50 buzz with a $4 sandwich
Tony Meola
Senior Member
Posts: 7036
Joined: Jun 29th, '06, 21:24
Location: Hillsdale, New Jersey
Contact:

Post by Tony Meola »

Vic

I am a big believer in oil changes. Just sitting is also no good for the oil or the engines. Change it and they will last longer than you will. Tony Meola
User avatar
Harry Babb
Senior Member
Posts: 2354
Joined: Jun 30th, '06, 21:45
Location: Fairhope Al
Contact:

Post by Harry Babb »

Hey Vic
I have ordered a 50 pound dressed pig for our 1st annual "Pig Pickin" on Labor Day this year. I have wanted to and talked about roasting a whole pig for quite some time now..........so Labor Day weekend I am going to give it a run for the money.

While the fire is hot I would like to try your famous Boston Butt recipe if you please share it with me.

Sounds like a perfect way to spend a Sunday morning.........adjusting the breeze in your face with a throttle handle..........

Harry Babb
hb
User avatar
capy
Senior Member
Posts: 168
Joined: Jul 6th, '06, 12:01

Post by capy »

Uncle Vic,

I am now the howdyboat champ, since becoming a dad 3 years ago.

We had a double header this weekend on my Picnic boat CAPY, Saturday we had 3 kids and 6 adults two full coolers of beer, wine, soda and food, ran @22 knots 8 miles to the beach and back- burned 16 gallons diesel.

Sunday- we had 4 adults and 2 kids same trip.

People at work are starting to question my race as my tan is getting quite dark.

School tuna are all over the place up here A women on my dock caught 100lber about 4 miles out the other day. I need to dump my commercial permit and go recreational.
User avatar
Dug
Senior Member
Posts: 2256
Joined: Jun 29th, '06, 11:04
Location: Worcester, MA

Post by Dug »

Paul,

Time to break out those bent buts and get to work.

Though I know where you are going for the beach and I have to say I like it too!
Eddy G
Senior Member
Posts: 193
Joined: Jun 29th, '06, 09:22
Location: Baton Rouge, Louisiana

Post by Eddy G »

Vic: Thanks for the kind words. I sure don't want to make you rethink the "hyena" stigma. Sorry you missed the "Breast Fest" over at Dr. Nick's. The scenery around the pool was very nice. When it cools off a bit, you need to come visit over in Madisonville. Probably get to use about 35 gallons of that old stale fuel. Enjoyed the visit and we'll see you soon.

Eddy G.
User avatar
In Memory of Vicroy
Senior Member
Posts: 2340
Joined: Jun 29th, '06, 09:19
Location: Baton Rouge, LA

Post by In Memory of Vicroy »

John, keep your fingers crossed for another UVI....it may happen. Keep plugging away on Reel Cowboy. Remember, all it takes is time, patience, and money.

Tony, I was partly joking about the oil changes (not on the 21 KW tho)...I find that the 6BTA 250s use virtually no oil until they have about 110-130 hours on a change, then the consumption is about a quart every 20 hours or so. The book change interval is 250 hours. I figure the blowby is diluting the oil with diesel.....not bad after 2,500 hours or so.

Paul, Howdy Boating is me.....as I cruise into retirement, getting my butt kicked offshore is less and less appealing.....stepping off the B31 at TSL, waving bye bye to the capt. and mate, and carrying my ole ass to the swimming pool and a cold clear is a much more civilized option.

Eddy, yeah we could hear the commotion across the canal at Dr. Nick's...we had company and it was too hot to get out in the boat anyway....saw some of the scenery pass by our place in metal flake Howdy Boats. Bride only slapped me twice for using the Nikon 7x50s on them.

Harry, sounds like ya'll gonna have a couchon du lait....here's the recipe for the Boston Butts:

First take the roast and wash it good in warm water and let it drip dry. Then stuff it with fresh garlic. Cut your peeled garlic length-wise into fat slivers, take a thin knife and stab the roast deep and stuff the garlic in with your fingers....do this a lot, and don't forget the sides. Now make a rub: take a small dish and pour in a pile of salt, a lot. Then add some hot sauce, I like Crystal.....if you have Tony Chacerie's add a pile of that....now add just enough olive oil to make the mix thin enough to spread on the outside of the roast...now take a LOT of minced garlic (crushed garlic is better, like a garlic puree') and add that and stir it all up. Spoon it on the top of the roast and work it all over the roast with your fingers. We are making a crust on the roast.

Then put in the roast in a baking dish on a wire stand to get it off the bottom (do not cover it) and put it in a 325 degree oven for about an hour & a half to two hours .......shorter for a 6# roast, longer for a bigger one. Then remove from the oven and put on your bbq pit on indirect heat till done, still uncovered. Put some hickory chips in a tin can on the hot side of the pit to create some minor smoke. Use a meat therometer and get the center of the roast to 170 degrees and it be'z done. I use the wireless meat therometer and they are the best by far. I usually cook a 8# roast about 2 hours in the oven and another 3 on the pit.

So good it will make you slap yo momma.

UV

UV
User avatar
randall
Senior Member
Posts: 2623
Joined: Jun 29th, '06, 09:29
Contact:

Post by randall »

UV...missed the coonass contingent this week end.....you would have liked sunday.....clear and cool with no humidity...saturday was however a little port eads like........got so hot i jumped off the dock....well i guess thats not port eads like
User avatar
In Memory of Vicroy
Senior Member
Posts: 2340
Joined: Jun 29th, '06, 09:19
Location: Baton Rouge, LA

Post by In Memory of Vicroy »

No, jumping off the dock at PE could get you eaten by critters bigger than you......Wish we could have made it. Heat is brutal here, just rolled the garbage can down to the street and I'm soaked....digital gizmo says its 97 and the heat index is 112...nice numbers, for a heat stroke maybe.

What did Bruce do to get the little motor to run?....

UV
User avatar
thuddddddd
Senior Member
Posts: 1028
Joined: Jun 29th, '06, 07:42
Location: N. east Ma, home of fat teddy

Post by thuddddddd »

Pulled the starter cord. Just needed a little more oomph than randallllllll could get. Like big fresh batterys
User avatar
randall
Senior Member
Posts: 2623
Joined: Jun 29th, '06, 09:29
Contact:

Post by randall »

i think it was that no nonsense look he gave it.................actually i went out and bought a new plug and hadnt tried it yet....i did follow your advice about cleaning the points and got new gas....guess it was the plug.......next day all the gas drained out...bad valve....so patrick and i went to the evinrude store and got another (owner has a 31)....damn thing cost $21...that one fifth what i paid for the motor!!
User avatar
In Memory of Vicroy
Senior Member
Posts: 2340
Joined: Jun 29th, '06, 09:19
Location: Baton Rouge, LA

Post by In Memory of Vicroy »

Reminds me of the Aggie joke......chain saw owner takes it back, says it cuts too slow....salesman starts it up....Aggie says "what's that noise?".....

UV
User avatar
Harry Babb
Senior Member
Posts: 2354
Joined: Jun 30th, '06, 21:45
Location: Fairhope Al
Contact:

Post by Harry Babb »

Thanks for the recipe Vic..........

When are you comming back to Baldwin Co again??? We do the "Howdy" thing more than we fish nowadays..........I could use some help waving as we cruise..........its hard to drive, hold my beer, dodge the f*#?!%@ jetskis and wave to the docksters at the same time.

Harry Babb
hb
IRGuy
Senior Member
Posts: 1767
Joined: Jun 29th, '06, 07:48
Location: Wilmington, NC

Post by IRGuy »

Harry... I have found that if you go fast enougth you don't have to wave at them.. they give you the one finger salute all by themselves!

On the trip up the ICW 170 miles from Charleston, SC to Wilmington, NC, I was surprised to see how many video cameras were installed along the shoreline with signs saying "Boaters.. SMILE, you are being recorded!". I am sure many are just pretend, but I suspect quite a few are real.
User avatar
JohnD
Senior Member
Posts: 409
Joined: Jun 29th, '06, 09:48
Location: Baltimore, MD

Post by JohnD »

Gotta love Howdy boating, here on the Chesapeake we'd go almost every night for a ride, plenty of creeks and friends to visit.

Mind you, this is when I had a boat that floated and had motors in it. I can't wait to finish the repower and get back out on the water.

br,
John
Post Reply

Who is online

Users browsing this forum: No registered users and 110 guests