reelcrazy getting new engines

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
Reelcrazy
Posts: 34
Joined: May 13th, '19, 17:52

reelcrazy getting new engines

Post by Reelcrazy »

so my 31 bahia mar is getting a re-power. The engines are cummins 270 .I think I'll be ready to sea trial in about a month. i'm looking for some info on props
I
Thanks Ray have a friend who'll let me borrow a set of 21 x 23 three blade nibrals. I'm concerned that with 1.53 to 1 gears even with 1 engine I might not be able troll slow enough. Any one have suggestions
Tony Meola
Senior Member
Posts: 7036
Joined: Jun 29th, '06, 21:24
Location: Hillsdale, New Jersey
Contact:

Re: reelcrazy getting new engines

Post by Tony Meola »

Ray

Same engines on my 31 FBC. I am spinning 4 blade 20x23 with cup. Tell John Lane to set them up the same as mine. One engine I am at about 3.5 knots depending on the tide. Both engines at idle are 5 knots.

Need to slow down more, go to 3 blade for stripers. But given what we are seeing down our way, it is not looking good for the striper runs.
1975 FBC BERG1467-315
User avatar
Carl
Senior Member
Posts: 6082
Joined: Jul 5th, '06, 06:45
Location: Staten Island NY

Re: reelcrazy getting new engines

Post by Carl »

Tony Meola wrote: But given what we are seeing down our way, it is not looking good for the striper runs.

What's happening down your way Tony?

They have been killing them here for weeks.
Reelcrazy
Posts: 34
Joined: May 13th, '19, 17:52

Re: reelcrazy getting new engines

Post by Reelcrazy »

i'm hoping to get in on some fall fishing . it's rarely good down by barnegat in the spring for trolling
User avatar
bob lico
Senior Member
Posts: 5278
Joined: Jun 29th, '06, 19:22
Location: sayville,long island

Re: reelcrazy getting new engines

Post by bob lico »

31 Bahia Mar with 270hp Cummins-------it don`t get better then that. is john doing the installations?
capt.bob lico
bero13010473
Tony Meola
Senior Member
Posts: 7036
Joined: Jun 29th, '06, 21:24
Location: Hillsdale, New Jersey
Contact:

Re: reelcrazy getting new engines

Post by Tony Meola »

Carl

The fish are far and few between. The spring run has been a bust so far.
1975 FBC BERG1467-315
Tony Meola
Senior Member
Posts: 7036
Joined: Jun 29th, '06, 21:24
Location: Hillsdale, New Jersey
Contact:

Re: reelcrazy getting new engines

Post by Tony Meola »

Bob

It is Ray Bellanger's boat. It is inside in the shop.
1975 FBC BERG1467-315
Reelcrazy
Posts: 34
Joined: May 13th, '19, 17:52

Re: reelcrazy getting new engines

Post by Reelcrazy »

it's outside now still needs exhaust raw water and rewiring
Tony Meola
Senior Member
Posts: 7036
Joined: Jun 29th, '06, 21:24
Location: Hillsdale, New Jersey
Contact:

Re: reelcrazy getting new engines

Post by Tony Meola »

Ray

Not liking what I am hearing about the health of the striper population.
1975 FBC BERG1467-315
User avatar
Carl
Senior Member
Posts: 6082
Joined: Jul 5th, '06, 06:45
Location: Staten Island NY

Re: reelcrazy getting new engines

Post by Carl »

Tony-
Not sure what your hearing, but up my way it has been stellar the past few years. Having literally tons of bait in the bay hasn't hurt, might be a reason they are not leaving our area.
Wasn't all that many years ago if you were catching bass in the 30 lb range you were "the man". Today its all about the high 40's and 50's with guys striving for a 60lb.
User avatar
John F.
Senior Member
Posts: 2114
Joined: Jun 29th, '06, 07:58

Re: reelcrazy getting new engines

Post by John F. »

Ray--Reel Crazy will be great with new motors. Congratulations. I can get Crows Nest (300 hp DD w/3 blades--forget what size wheels) down to about 3.5 knots on one motor. Not as slow as I'd like, but it works when I do troll for stripers/rock.

From what I understand, Virginia suspended its spring trophy season this year, and in mid-Bay where I am, the trophy fishing (min. size 35") is awful. Very few trophy fish being caught. The spring and fall trophy seasons have been worse every year. The regular season slot limit opened up 5/15, and on 6/1, the Bay (including tributaries) opens up. I haven't fished yet this year.

John
1968 B20 Moppie - Hull # 201-937
1969 B31 FBC - Hull # 315-881 (sold)
1977 B31 FBC - Hull # BERG1652M77J (sold)
Tony Meola
Senior Member
Posts: 7036
Joined: Jun 29th, '06, 21:24
Location: Hillsdale, New Jersey
Contact:

Re: reelcrazy getting new engines

Post by Tony Meola »

Ray

I am not in yet. Been busy. Hoping to get in weekend after memorial day. If I do and you want to take a spin let me know. You are not th at far from me. I will let you know when I splash.
1975 FBC BERG1467-315
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 348 guests