Please help guys

[Rickysa]

"Goober" was kind enough to pass along an 8X8 fiberglass hardtop to me in hopes I can make it work on the 74 FBC I'm bringing home in a couple of weeks.

Can anyone with a hardtop on a FBC give me a general size description on what you have had made...I'm just looking for guidelines to plan on resizing.

I've done a good bit of FB work one my first 31...I just need to decide if I want to start from new, or take the time to refurbish.

[my other east]

i purchased a half tower from a member here, but it had a canvas top. imo canvas is a pia.
i went ahead and formed/glassed a top that was about 2" wider than the railing the canvas tied to.
overall, it was just under 9 feet long, and just under 6 feet wide.
hope this helps...

[Rickysa]

Thanks Eric, much appreciated.

[Dug]

Ricky
Message me your email or post if you like. I will send you pictures of mine. I can't get dimensions as I am not close, hence my silence. But you can see pictures and maybe thats better than nothing?

Dug

[Rickysa]

Will do Dug, that would be great...I've looked at several on the site here, and I've got specs on the 31 in general...so that would be a great help.

Rickysa@aol.com

Thanks!

[Dug]

Sent you a couple emails. Hope it helps!

[Craig Mac]

Marlin's boat Wahoo is on the Palm Beach Tower's website---couple shots for reference


http://www.pbtowers.com/pages/galleryDe ... mIdVal=231

[Rickysa]

Doug/Craig...spot on, many thanks

[MikeD@Lightningshack]

FYI,

I have some computer models I made of the Hardtop on the Lightningshack. I'd be happy to get you any dimensions you need from these models.

http://www.lightningshack.com/photo_gal ... index.html

Mike

[Rickysa]

I have some computer models I made of the Hardtop on the Lightningshack. I'd be happy to get you any dimensions you need from these models.

Mike, that would be beyond great!! Many thanks.

rickysa@aol.com

[MikeD@Lightningshack]

I sent you an email with a detailed pipework attachment.

Mike