31 Bertram Questions
Moderators: CaptPatrick, mike ohlstein, Bruce
-
CappelloVince717
- Posts: 30
- Joined: Jul 5th, '17, 16:02
- Location: New Jersey
31 Bertram Questions
I bought a 70s 31 Bertram and I have a couple questions. I removed the water tank in the cabin and can't find a replacement. I could build one out of glass but would rather buy one. If anyone has a suggestion on where to find one? Also went a head and removed aft bulkhead top to open up cabin to v berth what kind of framing should be done for support. I was thinking 2x2 then glass them in but if anyone has suggestions that would be helpful. And dose anyone have measurements for the bathroom if I did it on the starboard side in the back. Thanks in advance. It is the Sportfish model I believe.
-
mike ohlstein
- Site Admin
- Posts: 2394
- Joined: Jun 29th, '06, 11:39
- Location: So many things seem like no-brainers until you run into someone with no brain.
- Contact:
-
Tony Meola
- Senior Member
- Posts: 7036
- Joined: Jun 29th, '06, 21:24
- Location: Hillsdale, New Jersey
- Contact:
Re: 31 Bertram Questions
Vince
Ronco is a good source. They do a lot of roto molding. They used to do custom orders for a fair price, but I am not sure the still do it. They made my holding tank but that was probably 16 years ago.
Ronco is a good source. They do a lot of roto molding. They used to do custom orders for a fair price, but I am not sure the still do it. They made my holding tank but that was probably 16 years ago.
1975 FBC BERG1467-315
Who is online
Users browsing this forum: No registered users and 455 guests