Copper grounding strap

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
ed c.
Senior Member
Posts: 303
Joined: Jun 29th, '06, 18:51
Location: wildwood crest, nj

Copper grounding strap

Post by ed c. »

Where is good place to buy the copper grounding strap and bronze screws & bolts?
User avatar
CaptPatrick
Founder/Admin
Posts: 4161
Joined: Jun 7th, '06, 14:25
Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com

Re: Copper grounding strap

Post by CaptPatrick »

Ed,

Try Storm Copper Components... I believe that I bought from them when I did Hancock's boat...
Br,

Patrick

Molon labe
User avatar
mike ohlstein
Site Admin
Posts: 2394
Joined: Jun 29th, '06, 11:39
Location: So many things seem like no-brainers until you run into someone with no brain.
Contact:

Re: Copper grounding strap

Post by mike ohlstein »

I used hanger strap. It's thicker than copper tape, and you don't have to cut sheet stock down to size.

http://www.hailiang.us/hanger-starp.htm

Image
Mike
Mean Team Leader
PREDATOR

Burn Oil
Eat Food
1973 FBC 1286 0273-315
User avatar
mike ohlstein
Site Admin
Posts: 2394
Joined: Jun 29th, '06, 11:39
Location: So many things seem like no-brainers until you run into someone with no brain.
Contact:

Re: Copper grounding strap

Post by mike ohlstein »

Copper fasteners can usually be found at a roofing supply house, but Jamestown Dist. has them.

http://www.jamestowndistributors.com/us ... &page=GRID


Image
Mike
Mean Team Leader
PREDATOR

Burn Oil
Eat Food
1973 FBC 1286 0273-315
Navatech

Re: Copper grounding strap

Post by Navatech »

Yes, I know Bertram used the copper strap... They did so also on the 46's... My question is what makes the copper strap better for bonding purposes then a suitable marine cable?!... All other boats I have seen to date used cable...

The copper strap was gone (MIA) in certain parts of my boat... As a temporary measure I used cable to have a working bonding system... Working being defined as having electrical continuity among all underwater metal structures (through hulls, sea cocks, struts, rudder, shaft as well as the above water AC outlet through hull...

Long term I'm going to redo the whole system... Probably when I convert to 24 volts... Should I use strap instead of cable?!... And, if so, why?!...
User avatar
mike ohlstein
Site Admin
Posts: 2394
Joined: Jun 29th, '06, 11:39
Location: So many things seem like no-brainers until you run into someone with no brain.
Contact:

Re: Copper grounding strap

Post by mike ohlstein »

Wire works fine. If I was going to use wire though, I'd use bare wire, just to make sure that no one ever mistook it for something it isn't. The advantage to the strap is that you can nail it to stuff, bolt stuff to it, and as soon as you see it you know it's the bonding strap.
Mike
Mean Team Leader
PREDATOR

Burn Oil
Eat Food
1973 FBC 1286 0273-315
User avatar
Pete Fallon
Senior Member
Posts: 1318
Joined: Jun 29th, '06, 23:10
Location: Stuart Fl. and Salem, Ma.

Re: Copper grounding strap

Post by Pete Fallon »

Faithful,
The #8 Tinned Copper Wire is available at any large marine store, its green color is recognized as a bonding conductor. It 's easier to run the wire to each fitting that you want bonded. Just make sure that you use heat activated epoxy terminal ends, captive lug style when attaching each drop to the fitting. Copper was used by Bertram when prices were low back in the old days. Just use #8 AWG Green wire.
Pete Fallon
1961 Express Vizcaya Hull 186 12-13-61
Tony Meola
Senior Member
Posts: 7036
Joined: Jun 29th, '06, 21:24
Location: Hillsdale, New Jersey
Contact:

Re: Copper grounding strap

Post by Tony Meola »

http://www.gacopper.com/

I bought mine from Georgia Copper.
1975 FBC BERG1467-315
Post Reply

Who is online

Users browsing this forum: No registered users and 139 guests