Last offer!
Moderators: CaptPatrick, mike ohlstein, Bruce
Last offer!
I know this is not the buy/sell board but railing/ladder system off my 28 needs a home. I hate to toss it. I can bring it to Lauderdale if anyone wants to take it from there. Some one could at least use a replacement ladder. I just do not have the room to store the stuff. It is free for anyone on this site. Let me know, if not, stuff goes into the trash. Kevin
- scot
- Senior Member
- Posts: 1470
- Joined: Oct 3rd, '06, 09:47
- Location: Hurricane Alley, Texas
- Contact:
Kevin,
I believe I can use the ladder, do you have any photos and a measurement would help. I am converting a 25B that is a hard top into a FB...a ladder will be needed if I expect to get to the bridge. I'm not sure if the rails will work?
The only issue I have is that I am in Texas and have no trips to the Sun Shine state in the near future.
Scot
I believe I can use the ladder, do you have any photos and a measurement would help. I am converting a 25B that is a hard top into a FB...a ladder will be needed if I expect to get to the bridge. I'm not sure if the rails will work?
The only issue I have is that I am in Texas and have no trips to the Sun Shine state in the near future.
Scot
Scot
1969 Bertram 25 "Roly Poly"
she'll float one of these days.. no really it will :-0
1969 Bertram 25 "Roly Poly"
she'll float one of these days.. no really it will :-0
-
- Senior Member
- Posts: 267
- Joined: Jun 29th, '06, 13:30
- Location: Nassau,Bahamas
- Contact:
Kevin:
Are you re-installing the railings in the cockpit at the engine compartment step-up????
If those railings are 'available' please let me know !
Looking forward to hearing more on your Steyr's..........and my boat IS a floating hardware store..............
1398
Are you re-installing the railings in the cockpit at the engine compartment step-up????
If those railings are 'available' please let me know !
Looking forward to hearing more on your Steyr's..........and my boat IS a floating hardware store..............
1398
Preston Burrows
1976 B28 FBC
BERF1398M76J-285
1976 B28 FBC
BERF1398M76J-285
-
- Senior Member
- Posts: 267
- Joined: Jun 29th, '06, 13:30
- Location: Nassau,Bahamas
- Contact:
Steve:
I don't miss mine,but I will when sides both railings gunnel 'stanchion' bases finally give out - they are corroded from the inside out and I cannot weld stainless !
They help me keep things in 'perspective' when its a rough day trolling and my friend's kids like them.......
Kevin:
Where will your boat be located at the Lauderdale show?
Maybe you should call your boat 'Ethanot' !
[I thought you may have taken those rails off to help access for your re-power,as they do get in the way when working on the back of the engines or transmissions.]
1398
I don't miss mine,but I will when sides both railings gunnel 'stanchion' bases finally give out - they are corroded from the inside out and I cannot weld stainless !
They help me keep things in 'perspective' when its a rough day trolling and my friend's kids like them.......
Kevin:
Where will your boat be located at the Lauderdale show?
Maybe you should call your boat 'Ethanot' !
[I thought you may have taken those rails off to help access for your re-power,as they do get in the way when working on the back of the engines or transmissions.]
1398
Preston Burrows
1976 B28 FBC
BERF1398M76J-285
1976 B28 FBC
BERF1398M76J-285
Preston/Steve,
I think the boat looks clean without them. As I mentioned before, 99.99% of my time with this boat it has been a project. Never even fished out of it yet, but that will change soon. I am 6'3", so I could imagine literally tripping over the rails if I had them.
My boat should should be at slip D34. I will be dropping it off middle of week. I hope to return Friday night or Saturday morning. I hope to meet some of you guys there. If you go by the boat make sure to talk with Sid. He can tell you all the ins and outs of the Steyr Motors. Should exchange phone numbers. Mine is 305 481 0253. I am looking for suggestions on things like access to bridge. I have a pretty good idea of what I want but not enough time to finish all the little things before I get there.
Oh, yeah, if there are no takers for lauderdale pick up, I could always ship the ladder to Texas. Kevin
I think the boat looks clean without them. As I mentioned before, 99.99% of my time with this boat it has been a project. Never even fished out of it yet, but that will change soon. I am 6'3", so I could imagine literally tripping over the rails if I had them.
My boat should should be at slip D34. I will be dropping it off middle of week. I hope to return Friday night or Saturday morning. I hope to meet some of you guys there. If you go by the boat make sure to talk with Sid. He can tell you all the ins and outs of the Steyr Motors. Should exchange phone numbers. Mine is 305 481 0253. I am looking for suggestions on things like access to bridge. I have a pretty good idea of what I want but not enough time to finish all the little things before I get there.
Oh, yeah, if there are no takers for lauderdale pick up, I could always ship the ladder to Texas. Kevin
- Hyena Love
- Senior Member
- Posts: 309
- Joined: Jun 30th, '06, 09:54
Hyena Drunk Rails
Anybody interested in the drunk rails, I have a set in my garage. Yours for the cost of shipping.
I am in Houton Texas.
I am in Houton Texas.
-
- Senior Member
- Posts: 73
- Joined: Jul 13th, '06, 16:29
- Location: Lake Michigan- Grand Haven
- Contact:
Rails
My rails have been on since day one---20 yrs of chartering--probably saved a life or 2-- and if you have a cooler backed up to each one--not bad to lean against---on the rough days--it keeps the not so well footed in the middle of the boat---and not peaking over the edge--just depends on what you go out or fish in and experience level
my 3 cents
Dana
my 3 cents
Dana
Dana Bonney
Who is online
Users browsing this forum: No registered users and 3 guests