Page 1 of 1
Generator Shelf on Port Outboard side of cummins 6bta
Posted: Apr 17th, '10, 07:47
by fishlook
Can any tell me the size of the shelf the were able to fit into the port outboard side to hold the generator? looking for a maximum width
the nextgen 3.5kw i have coming needs a footprint of 30" L X 18" W X 16.5 H.
Posted: Apr 17th, '10, 08:20
by CaptPatrick
Jay,
I'll post some images a little later today... Suggest you drive over and get a first hand look and possible answers to many of your questions.
http://bertram31.com/directions/
Posted: Apr 17th, '10, 08:49
by wmachovina
I'll be at the boat today. Have cummins with nexGen 3.5 to port. Dont remember dimensions but call me at 772 240 6146 and I'll get them. No problem with the fit but hoses and wiring expand the footprint a bit,Bill,ps can take a pic w Iphone and send
Posted: Apr 17th, '10, 09:15
by CaptPatrick
Posted: Apr 17th, '10, 19:46
by wmachovina
And I can change my port engine water pump.
Posted: Apr 17th, '10, 20:26
by CaptPatrick
but hoses and wiring expand the footprint
I relocated all of the fittings... Fuel and water to the aft end, electrical to the forward end.
I'll photograph that on Monday.
