Page 1 of 1

DeNada

Posted: Jul 19th, '09, 20:43
by Harry Babb
Well yesterday and today the tempt was in the upper 80's to lower 90's but the humidity was very low.....must have been a cold front came thru

I worked on my lifelong project.....DeNada....the deck is now Screwed, Glued and Tatooed.....now its on to the hatches or sanding and painting the engine compartments or sanding the bottom......looks like there AIN'T no way around that blessed sander.......might as well roll up my sleeves and get with it.

Feels good to actually SEE progress for a change....

Harry

Posted: Jul 20th, '09, 07:14
by randall
keep bangin away......its the only way. the funny thing is you never actually get "there" 10 years later and i still have a 5 page mental punch list. but every accomplishment feels good.

BTW....ran over to the "hatt" rendezvous in greenport yesterday. nice folks.

Posted: Jul 20th, '09, 08:39
by Brewster Minton
Harry you can do it.

Posted: Jul 20th, '09, 09:48
by Rawleigh
I know it feels like it takes forever, but that is because you are doing it right the first time and will never have to do it again!!

Posted: Jul 20th, '09, 09:49
by JP Dalik
Just giver her hell Harry.

I do have a bit of bad news for you though, and this is from my own experience.

You will never be able to throw that sander away. Just when I think I can pitch that SOB something else pops up that requires a little random orbital wonder. Don't be too upset its usually on the bottom and makes a much bigger mess than you intended. LOL


Good Luck and just don't stop.

Posted: Jul 20th, '09, 10:00
by chris pague
Harry; I know you have one but make sure you have a spair sander or a few DGF's short for Dumb Good Friends
Chris