Page 1 of 1
Glasstech cockpit in Bahia Mar
Posted: May 27th, '09, 06:20
by Bertramp
The glasstech cockpits that I have seen end at the aft end of the engine boxes and offer a small piece that goes in the walkway between the engines. What do folks with Bahia Mars do for the remaider of the floor or is there a piece available that I am not aware of ?
thanks
Posted: Jun 23rd, '09, 11:59
by Bertramp
c'mon guys ... no answers on this one ?
Posted: Jun 23rd, '09, 13:02
by Charlie J
i think some one makes the complet set now. when mine was done, from the back of the enginges forward was completly rebuilt
Posted: Jun 23rd, '09, 14:04
by Bertramp
thanks
I have an accepted offer on one in SoHampton. The fingers are crossed.
Posted: Jun 23rd, '09, 16:42
by Rawleigh
I have a regular Glasstech deck for a Sportfish for sale if you are interested. It is still in the shipping crate. PM me if interested.
Posted: Jun 24th, '09, 00:23
by JohnCranston
Bertram,
We're redoing the bahia from the stringers up. I went with a Cabrera deck and engine boxes...I think about the same layout that you're considering. My glass guy built the floor from the cockpit forward including the space between the engine boxes and the helm area. He made a hatch between the engine boxes which I can measure for you next weekend if needed. I can also get some pics on the cell phone if you're serious.
Call me at 713-906-0842 and I'll get her done. No problem.
Posted: Jun 24th, '09, 05:20
by Charlie J
ok guys am i dreaming or does someone make a complet set for the bahia mar now
Posted: Jun 24th, '09, 06:58
by Bertramp
Spoke with Richard Kidd ... there is a forward piece available for Bahias. There has not been a great demand, so ...as you guessed it .. it's pricey. If any of you have picyures of what yours looks like, I would greatly appreciate it.
516-810-0959
bertramp1@aol.com
Posted: Jun 24th, '09, 07:17
by Charlie J
steve
if your up this way and passing thru freeport give me a call ill pm you my cell #
Posted: Jun 24th, '09, 08:31
by CHolgerson
We have a glasstech deck in our Bahia Mar and the rest of the deck was fabricated out of fiberglass. I will try and find some pictures.
Chris Holgerson
"Priceless"
bahia mar cockpit
Posted: Jul 6th, '09, 09:18
by tclub
i have moulds that match with the cabrerra rear deck. they build all the pieces from the engine to the front bulkhead including console. The moulds are located in freeport tx. if you are interested give me a calll
713 907 5659. there are pictures on this site of the pieces under old post baha mar