Fuel filter

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
Hookshurt
Posts: 34
Joined: May 24th, '07, 11:32
Location: Padre Island

Fuel filter

Post by Hookshurt »

Hopefully this is an easy answer. I have a B28 with a single fiberglass tank. At the fuel pick up point in the tank, is there any tipe of debris filter? I am troubleshooting a fuel problem and don't want to pull it if it is an unfiltered hose in order to check it. Thanks.
User avatar
Skipper Dick
Senior Member
Posts: 330
Joined: Jun 29th, '06, 08:22
Location: Cape Coral, Florida
Contact:

Post by Skipper Dick »

Hookshurt,

Around the bronze pipe pickup, there is a fine screen brazed on. You can pull the pickup out of the tank and clean it. I did mine, but you should pull it out gently so stuff doesn't fall off of it, it was pretty clogged with varnish and stuff. I used a brush and a cleaning solution, but you could probably use soap and water if you make sure it is good and dry when you put it back.

Dick
1983 Bertram 28 FBC w/300 Merc Horizon
Hookshurt
Posts: 34
Joined: May 24th, '07, 11:32
Location: Padre Island

Post by Hookshurt »

Thanks for the info. There is a cork gasket there, is that something that is fairly easy to find or should I go to one of the online retail outlets for the hard to find parts?
User avatar
CaptPatrick
Founder/Admin
Posts: 4161
Joined: Jun 7th, '06, 14:25
Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com

Post by CaptPatrick »

Yup, and will probably look something this one out of a B31...

Image

Image
User avatar
CaptPatrick
Founder/Admin
Posts: 4161
Joined: Jun 7th, '06, 14:25
Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com

Post by CaptPatrick »

Hookshurt wrote:Thanks for the info. There is a cork gasket there, is that something that is fairly easy to find or should I go to one of the online retail outlets for the hard to find parts?
NAPA sells cork sheeting, you'll have to make your own...
Hookshurt
Posts: 34
Joined: May 24th, '07, 11:32
Location: Padre Island

Post by Hookshurt »

Much thanks to you guys for helping!!!
User avatar
Bruce
Site Admin
Posts: 3789
Joined: Jun 29th, '06, 12:04
Location: Palm Beach Gardens, Fl.

Post by Bruce »

Forget pulling the plate. Unscrew the pickup from the plate and lift right out.
User avatar
CaptPatrick
Founder/Admin
Posts: 4161
Joined: Jun 7th, '06, 14:25
Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com

Post by CaptPatrick »

Got'a pull the plate on the 31. Baffles and dead rise of the tank are in the way... 28 may have a straight pipe, don't know.
User avatar
Skipper Dick
Senior Member
Posts: 330
Joined: Jun 29th, '06, 08:22
Location: Cape Coral, Florida
Contact:

Post by Skipper Dick »

28 is a straight pipe and all one has to do with it is have a large socket or cresent wrench to unscrew it.

Dick
1983 Bertram 28 FBC w/300 Merc Horizon
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 390 guests