Dredging with your boat

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
User avatar
Bruce
Site Admin
Posts: 3785
Joined: Jun 29th, '06, 12:04
Location: Palm Beach Gardens, Fl.

Dredging with your boat

Post by Bruce »

Not a good idea;
Image
Image
Image
Image

Also if you have a boat with engines like these, don't jump waves;

Image
Image

Been a busy week with less than stellar customers.
User avatar
In Memory of Vicroy
Senior Member
Posts: 2340
Joined: Jun 29th, '06, 09:19
Location: Baton Rouge, LA

Post by In Memory of Vicroy »

But Bruce, on the other hand, sort of like owning a gambling casino, if it was not for stupid people, you would be riding on the back of a garbage truck about daylight.....kinda like me & crooks.

UV
User avatar
Harry Babb
Senior Member
Posts: 2354
Joined: Jun 30th, '06, 21:45
Location: Fairhope Al
Contact:

Post by Harry Babb »

Bruce

You could write a book from all of the mishaps that you have seen in your time............

Vic

Another lawyer friend of mine always says that "I'm good as long as people keep misbehaven"

Those pics are unbelieveable

Harry
hb
User avatar
randall
Senior Member
Posts: 2623
Joined: Jun 29th, '06, 09:29
Contact:

Post by randall »

bruce...what am i lookin at in that bottom picture?
User avatar
scot
Senior Member
Posts: 1470
Joined: Oct 3rd, '06, 09:47
Location: Hurricane Alley, Texas
Contact:

Post by scot »

If your gonna use the boat for a dredge...you need a closed system, keel cooled Detroit. Tugs make great dredges.
Scot
1969 Bertram 25 "Roly Poly"
she'll float one of these days.. no really it will :-0
User avatar
Bruce
Site Admin
Posts: 3785
Joined: Jun 29th, '06, 12:04
Location: Palm Beach Gardens, Fl.

Post by Bruce »

The bottom pic is the forward gear on a bravo drive. Not a tooth left on the gear, or the pinion for that matter.

Looking at it with the rear cover removed.
jspiezio
Senior Member
Posts: 882
Joined: Nov 25th, '07, 07:21
Location: Long Island, NY

Post by jspiezio »

At least learn to throttle back when you your drive exits and re-enters the water.

Makes me feel good to know there are folks like that in boats like that on the water as I head home after sun down.....
User avatar
Hyena Love
Senior Member
Posts: 309
Joined: Jun 30th, '06, 09:54

Post by Hyena Love »

I will never forget the expresion on the face of the typically expressionless Capt. Pat. as I was describing my props repeatedly leaving the water, the tach slamming over to red line, and then dropping back to 3000 rpm when the prop re-entered the water.

You would have thought I just exited a UFO.

I could tell he was trying to pick his words a bit, and on the fly edit out the more unseemly of descriptive terms for his estimation of my mental competance and capacity.

Good times.
User avatar
Bruce
Site Admin
Posts: 3785
Joined: Jun 29th, '06, 12:04
Location: Palm Beach Gardens, Fl.

Post by Bruce »

He was just trying to form more than the common two that describe such an adventure.
User avatar
scot
Senior Member
Posts: 1470
Joined: Oct 3rd, '06, 09:47
Location: Hurricane Alley, Texas
Contact:

Post by scot »

Bruce your shots help make another case for the durability factor of inboards over the standard, off the shelf I/O units.

Ernest I have done the same on occassion and my little TwinDisc gear has yet to end up like that Bravo unit, can't say the beverage cans on the dash have faired as well.
Scot
1969 Bertram 25 "Roly Poly"
she'll float one of these days.. no really it will :-0
User avatar
Bruce
Site Admin
Posts: 3785
Joined: Jun 29th, '06, 12:04
Location: Palm Beach Gardens, Fl.

Post by Bruce »

Scot,
Had a customer back in the 80's, grandson to the Johnson and Johnson fortune out cruising on dads boat.

Twin 454 inboard Crusaders. Running at 4 grand, hit a wave and knocked both engines out of gear. Instead of throttling back, shoved them right back into gear.

Never saw two Borg Warner reduction gears implode before or since, that bad.

He was a nice kid, not bright, but then he was a member of the lucky sperm club and didn't have to be.
BlueChip
Posts: 53
Joined: Jul 2nd, '07, 18:25
Location: Connecticut
Contact:

Post by BlueChip »

He was a nice kid, not bright, but then he was a member of the lucky sperm club and didn't have to be.
haha Classic....


Chris
Restoring a 1973 Mako 20 . . B31 is next...when I find the cash

Image
My Dad's 1966 B20 that i am working on .. (pre-BootStripe)
Post Reply

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 307 guests