bertram31.com

Hi All,

I purchased a new thru-hull scoop to feed my livewell / washdown pumps and remember back in the day that I had to trim it to length and don't remember which direction it faced.

How tight to filling all the threads on the seacock do I need to go when I trim it to length?

https://photos.app.goo.gl/AjsM5BfujNkXo3aP6

Which direction is best?

Fwd, especially if you are using a centrifical type pump.

Depends on the thickness of your backing plate.

2 to 3 threads left on your thru hull before bottoming out is fine.