Page 1 of 1

prop help - Able Mable (old SeaNile)

Posted: Mar 7th, '22, 16:08
by wlbsr
I broke a shaft and my port prop went to the bottom saturday. I have hytorq 20 inch with a 23 pitch, 1.5 bore. It takes 6 weeks to get a new Michican (old hytorq). 2 shops in Morehead NC don't have anything on the shelf. Looking for some prop shops to find something in stock or to potentially buy a matching pair if I have to. Thanks for your help in advance. Bill Blount

Re: prop help - Able Mable (old SeaNile)

Posted: Mar 7th, '22, 18:01
by THESALTYSATO
Bill
try Wildcat prop shop in Chesapeake Virginia
also Big Rock propellers in Morehead City
sorry that happened

Re: prop help - Able Mable (old SeaNile)

Posted: Mar 7th, '22, 19:03
by Snipe
You could try acme propellers or veem conquest both are used on some 31 setups with good results!

Re: prop help - Able Mable (old SeaNile)

Posted: Mar 7th, '22, 20:00
by EarleyBird
I have a couple sets of propellers if you get in a bind. Gladly lend you one of them if they’ll work. All 1 1/2”. Have 5.9 BTA Cummins 270HP. One set are Hy-Torq. 20X22 4 blades #7 cup. The other Hy-Torq 21X23 3 blades. EarleyBird. Presently I’m running DQX 20x22 with a medium cup and they have increased EarleyBird’s cruise speed 23-2400 rpm quite noticeably. EarleyBird

Re: prop help - Able Mable (old SeaNile)

Posted: Mar 7th, '22, 21:57
by Tony Meola
I have to second what Early Bird said. I have the same set up but my DQX's are 20x23 with some cup.

Try Bobby Soles in Florida.

https://www.bobbysolespropeller.com/

Or Atlantis Propeller.


https://atlantisprop.com/

Re: prop help - Able Mable (old SeaNile)

Posted: Mar 8th, '22, 13:04
by wlbsr
thanks for all the replies. went with a new set off the shelf of what I had from general prop in Bradenton FL on a referral from Coastal Prop in Wilmington. hopefully they are on ups as we speak. thanks again and now I have a 20Rx23 4 blade hytorq on my shelf if anyone is ever in need.

Re: prop help - Able Mable (old SeaNile)

Posted: Mar 8th, '22, 21:18
by bbtiller
I have a pair, recently tuned/one new, for the 31 I recently sold. Will sell. Georgetown,SC. bbtiller@gmail.com

Re: prop help - Able Mable (old SeaNile)

Posted: Mar 11th, '22, 06:49
by John Nardi
What size are the props and are they 3 or 4 blade? What are you asking for them?? Thanks John