Page 1 of 1
Bow hatch skylite
Posted: Oct 7th, '21, 08:07
by Bertramp
Hi Folks ...
Looking to install a bow hatch (non opening glass) to my the bow hatch on my 31 Bahia in order to get a little more natural light below decks.
In a prior life, I had an insert made up by Tom Slane of Hatteras fame.
I've seen these on several B31s .... what is or has been the source ?
Thanks
Re: Bow hatch skylite
Posted: Oct 7th, '21, 11:39
by PeterPalmieri
I sent you some pics on FB messenger.
Re: Bow hatch skylite
Posted: Oct 7th, '21, 19:05
by Stephan
Steve-
I copied the job from JP Dalik. We just cut out a square from the middle of the existing hatch and got a piece of 1/2" Greylite (it comes in varying darkness, I think we chose 14?). If I remember the glass was eyewateringly expensive. We just floated the glass in some sealant the glass company sold - I think it was a 3M product with UV inhibitors - it has help up well.
Here are the pictures JP posted:
We have short seasons in Rhode Island and do not suffer the same sunlight intensity. For us the tint is dark enough that I have not noticed any fading of the fabrics in the v berth but there is good light up there. I have noticed some sort of checking in the glass after 8 years.
Good luck!
Stephan
Re: Bow hatch skylite
Posted: Oct 8th, '21, 13:55
by Amberjack
Or as Richard Kidd who ran the Bertram parts department said when I called to ask him about deck hatch skylights "Open the H-A-T-C-H".
Re: Bow hatch skylite
Posted: Oct 8th, '21, 18:43
by Snipe
I made a piece out of 1/2” lexan an will direct glaze it into my bow hatch. Very similar to the picture just bigger. I use sikaflex to glue it in. Same as all my windows. Then of coarse all new hardware!
Re: Bow hatch skylite
Posted: Oct 9th, '21, 06:05
by neil
Steve timmmmymade ours and it looks great