effective way to pinpoint a leak
Posted: Feb 11th, '21, 14:18
It drives me crazy that after a good rain I'll have water on the counter top in the head and galley area. I have had someone stand inside the head while I squirted a hose down the port side of the boat starting with the flying bridge then moving down to the hand rail attached to the flying bridge ledge and also the handrail attached to the gunnel. I continued to flood the windows and gunnel to no avail. It rains and I open the head door and BAM there is standing water on the counter up in the left hand corner. Whenever it is coming when it drips on the counter it missed the shelf just below the window.
Then I go to the other side of the head bulkhead into the galley area and water is standing in the left hand corner of the galley area. I also have steaks running down the bulkhead in the sleeping berth. I don't have anything at the moment on the bulkhead. I removed the old carpet that was attached to the bulkhead when I purchased the boat. I'd like to put something back for better acoustics but want to stay dry first.
I know water has a habit of entering one place and following the path of least resistance before dripping. Someone suggested lining the window ledge with baking soda or baby powder and the next time it rains check to see if the powder is dry or wet and where. With so much condensation on boats I'm not sure if everything would seem wet due to condensation.
Anyone who has been there done that would be welcomed to chime in. Thanks Doug from he CTurtle
Then I go to the other side of the head bulkhead into the galley area and water is standing in the left hand corner of the galley area. I also have steaks running down the bulkhead in the sleeping berth. I don't have anything at the moment on the bulkhead. I removed the old carpet that was attached to the bulkhead when I purchased the boat. I'd like to put something back for better acoustics but want to stay dry first.
I know water has a habit of entering one place and following the path of least resistance before dripping. Someone suggested lining the window ledge with baking soda or baby powder and the next time it rains check to see if the powder is dry or wet and where. With so much condensation on boats I'm not sure if everything would seem wet due to condensation.
Anyone who has been there done that would be welcomed to chime in. Thanks Doug from he CTurtle