Engine sound insulation
Moderators: CaptPatrick, mike ohlstein, Bruce
-
- Posts: 99
- Joined: Oct 22nd, '16, 04:41
- Location: UK and all over
Engine sound insulation
Hi,
What are the best materials to use for engine bay sound insulation? Do you guys use the lead layer foam type for the lids, or is it too heavy?
Does the egg box type foam do anything worthwhile?
Grateful for any advice.
What are the best materials to use for engine bay sound insulation? Do you guys use the lead layer foam type for the lids, or is it too heavy?
Does the egg box type foam do anything worthwhile?
Grateful for any advice.
David Davidson
1971 B31 FBC Hull no 315-1106
1971 B31 FBC Hull no 315-1106
- MarkS
- Senior Member
- Posts: 1160
- Joined: Jun 29th, '06, 08:40
- Location: The Frozen Tundra/EX-democratic stronghold Wisconsin
Re: Engine sound insulation
I have yet to do so but when I asked the same question I was told soundown.
http://www.soundown.com/index_Marine.htm
http://www.soundown.com/index_Marine.htm
72 Bertram 25 FBC "Razorsharp" Hull #254-1849
Things of quality have no fear of time.
Bondage to spiritual faith faith to great courage courage to liberty liberty to abundance abundance to complacency to apathy to dependence to bondage
Things of quality have no fear of time.
Bondage to spiritual faith faith to great courage courage to liberty liberty to abundance abundance to complacency to apathy to dependence to bondage
Re: Engine sound insulation
David,
I have the foam/led/foam layers under the top of the boxes. At some places it’s hanging, but, after who knows how many years.From p-po...
Point is, there are SO many other places I have removed insulation to pass cables, tubes etc, that whether there is led insulation on top or not, it really doesnt matter...
Anyway, I believe that insulation is only necessary if someone intends to be spending time in the cabin, while en route, nobody does that on my boat.
Also, up on the bridge its super quiet, sometimes I hang over to listen to the engines if they sound ok.
I have the foam/led/foam layers under the top of the boxes. At some places it’s hanging, but, after who knows how many years.From p-po...
Point is, there are SO many other places I have removed insulation to pass cables, tubes etc, that whether there is led insulation on top or not, it really doesnt matter...
Anyway, I believe that insulation is only necessary if someone intends to be spending time in the cabin, while en route, nobody does that on my boat.
Also, up on the bridge its super quiet, sometimes I hang over to listen to the engines if they sound ok.
1973 B28 FBC/2007 4LHA STP's - "Phantom Duck" - Hull "BER 00794 1172"
-
- Senior Member
- Posts: 7036
- Joined: Jun 29th, '06, 21:24
- Location: Hillsdale, New Jersey
- Contact:
Re: Engine sound insulation
Dave
If you are running diesels the sound down is a must. There are others on the market but they are about the best for boats.
When I had the big block gas engines, you could live with the sound but I get complaints with the diesels, especially when the Turbo kicks in. I was going to install it this past summer but did not get to it. It will be installed this spring. Tired of the wife complaining.
If you are running diesels the sound down is a must. There are others on the market but they are about the best for boats.
When I had the big block gas engines, you could live with the sound but I get complaints with the diesels, especially when the Turbo kicks in. I was going to install it this past summer but did not get to it. It will be installed this spring. Tired of the wife complaining.
1975 FBC BERG1467-315
- MarkS
- Senior Member
- Posts: 1160
- Joined: Jun 29th, '06, 08:40
- Location: The Frozen Tundra/EX-democratic stronghold Wisconsin
Re: Engine sound insulation
Tony while you’re at it could you swing over and install mine too?
72 Bertram 25 FBC "Razorsharp" Hull #254-1849
Things of quality have no fear of time.
Bondage to spiritual faith faith to great courage courage to liberty liberty to abundance abundance to complacency to apathy to dependence to bondage
Things of quality have no fear of time.
Bondage to spiritual faith faith to great courage courage to liberty liberty to abundance abundance to complacency to apathy to dependence to bondage
-
- Posts: 99
- Joined: Oct 22nd, '16, 04:41
- Location: UK and all over
Re: Engine sound insulation
Thanks guys. The Yanmars are LOUD. Too loud to live with long term, so I’ll get it done this Winter.
Not sure I can find Soundown over this side. I will need to find similar.
Merry Christmas to all.
David.
Not sure I can find Soundown over this side. I will need to find similar.
Merry Christmas to all.
David.
David Davidson
1971 B31 FBC Hull no 315-1106
1971 B31 FBC Hull no 315-1106
-
- Senior Member
- Posts: 7036
- Joined: Jun 29th, '06, 21:24
- Location: Hillsdale, New Jersey
- Contact:
Re: Engine sound insulation
MarkS wrote:Tony while you’re at it could you swing over and install mine too?
Be right over. In fact I will bring Carl with me so I can buy him a beer and some cheese just before we install the SoundDown.
1975 FBC BERG1467-315
- MarkS
- Senior Member
- Posts: 1160
- Joined: Jun 29th, '06, 08:40
- Location: The Frozen Tundra/EX-democratic stronghold Wisconsin
Re: Engine sound insulation
The economy of motion. I preach it daily.
72 Bertram 25 FBC "Razorsharp" Hull #254-1849
Things of quality have no fear of time.
Bondage to spiritual faith faith to great courage courage to liberty liberty to abundance abundance to complacency to apathy to dependence to bondage
Things of quality have no fear of time.
Bondage to spiritual faith faith to great courage courage to liberty liberty to abundance abundance to complacency to apathy to dependence to bondage
Re: Engine sound insulation
I used the foam/vinyl sound down. Not as heavy as the lead stuff, and not quite as effective, but it makes a big difference. Install on a B31 engine box is pretty easy. The sound down guys I’ve dealt with are great
1968 B20 Moppie - Hull # 201-937
1969 B31 FBC - Hull # 315-881 (sold)
1977 B31 FBC - Hull # BERG1652M77J (sold)
1969 B31 FBC - Hull # 315-881 (sold)
1977 B31 FBC - Hull # BERG1652M77J (sold)
Who is online
Users browsing this forum: Bing [Bot], Google [Bot] and 214 guests