bertram31.com

i' m looking for some 1" coosa board blue water 26 to build two strut pads anyone know where i can get some in NJ

I don’t know about 1in but Barnagat Light Fiberglass Supply carries 1/2 in for sure. I used garolite to make my strut pads you can find it on McMasterCarr usually have it the next day. It’s much stronger than Coosa for that application.
https://www.google.com/search?q=barnega ... ent=safari

This place has it in smaller sheets.https://www.boatoutfitters.com/coosa-composites-board
And they may be able to cut it down for shipping too. Call and ask. They cut starboard down to custom sizes.

https://www.mcmaster.com/#structural-fi ... )/=1e8uuk2

Ray

I used 1/2 inch structural fiberglass from McMaster. By the time you bed it and put Matt over it you will be adding close to an inch of glass.

https://bertram31.com/proj/struts/strut_backing.htm

Capt. Pat always liked to use plywood. He thought glass would shatter if you hit something. I figured that if the new boats could use all glass why not. Too many boats in production so if this was a problem it would have shown up by now.