bertram31.com

I may have asked this question in the past, but I can't find the thread...

I need to decide on the location of the midship cleats before I paint the cap Friday. Based on my old pictures, these are located somewhere aft of the max beam and forward of the fuel fills. Can someone give me a rough measurement from the transom corner to center of the cleat?

Thanks
Cam

Mine are mid-window.
https://www.facebook.com/enduranceb25/p ... =3&theater

That's the spot...just need to find that spot on my modified cap. Any chance you could measure? thanks

I'll probably get to the boat tomorrow.

Thanks!

Cam,

It seems that you've made a lot of progress on your boat since we've last talked.

I don't have an exact measurement but my boat didn't have mid-boat cleats when I bought it, I added a pair of pop-up cleats about 18-24" behind the main bulkhead.

Center of the mid-ship cheat to the aft end of the stern cap is 145", measure along the gunwale.

Thanks, Scot. That seems to be the spot. I sprayed the cap with 3 coats of Awlcraft 2000 - Oyster White today. It took every bit of a quart +mixers to do it. Lays out nice and shines pretty well. Highlights all the imperfections in my fabrication work, too!