B28 engine room w/ yanmars - Yannis!
Posted: Feb 16th, '18, 08:28
Yannis,Could you please put up a pic of your engine room, in another thread, so I can see the layout...we have same m.y. boats and almost identical engines...I would like to see how hi or low your engines sit and if you have risers...I fear that you may have to add some kind of rubber or metal flaps to your exhaust holes so as to better keep your turbos dry from backsplash. The slope of the whole exhaust tube, with the Yanmars, is almost flat...
Thanks.
This is my engine room prior to the rebuild project....it was a mess
My transmissions are 10 degrees so my engines are very high. They have less than an inch between the cover and the top of the valve cover. My step is the low one also. The exhausts had no risers, mufflers or surge tubes. I am going to put both now. The mufflers have good baffles that can hold water out and just in case they pass the mufflers, I will have the surge tubes for reassurance.
If you need anything else, just let me know!
