Page 1 of 1
Help needed identifing HP on these Yanmars
Posted: Jul 31st, '15, 13:20
by waggles02673
I am looking at buying a boat and one of the Yanmars is a 4LHA-STP continuous power is kW 140/3100 RPM and 177/3300 rpm. This engine is a Yanmar 230-240 or correct?
The second motor in the boat is a 4LHA-DTE continuous power kW 116/3100 RPM and kW 140/3300 RPM. Is this engine a Yanmar 190hp? Just trying to make sure I am not miss reading the HP on these 2 engines in the boat in question. If they are truly different HP why would someone repower with 2 different HP motors?
Thanks
Jon
Re: Help needed identifing HP on these Yanmars
Posted: Jul 31st, '15, 13:33
by CaptPatrick
Jon,
They are indeed a 240 & a 190 hp mismatch... Keep looking!
Re: Help needed identifing HP on these Yanmars
Posted: Jul 31st, '15, 15:04
by waggles02673
Capt Pat thanks as always
Re: Help needed identifing HP on these Yanmars
Posted: Jul 31st, '15, 15:57
by Rawleigh
"If they are truly different HP why would someone repower with 2 different HP motors?"
They are an idiot or they are looking to screw someone.
Re: Help needed identifing HP on these Yanmars
Posted: Jul 31st, '15, 16:44
by Bruce
Rawleigh,
Not enough info to make a determination but I saw quite a few mismatched 4lha engines in boats when diesel repowers became popular.
One of the first was a 28 Bert that a guy repowered and brought to me after the sea trial empty went fine. After he loaded up couldn't get on plane. Installer couldn't figure it out.
First thing I did when he pulled up to the dock was check model and serials. When the model suffix was different I told him I found his problem. He was pissed, offered to pay me, I declined and he went on his way more than likely back to his repower guy.
Sometimes its as simple as checking the model numbers.
Re: Help needed identifing HP on these Yanmars
Posted: Jul 31st, '15, 17:29
by waggles02673
The seller bought the boat from a friend who did the repower himself. The current owner claims to know nothing about the mismatched motors. I think his "friend" who repowered the boat himself either screwed him or the current owner isn't being truthful with us. Needless to say we walked away from the deal.
Re: Help needed identifing HP on these Yanmars
Posted: Aug 1st, '15, 20:22
by Navatech
Or, one engine bought the farm, they couldn't find a matching engine on the cheap so they got what they could and are now looking to offload it on some unsuspecting idiot...
Why do I say idiot?!... Because anybody who's going to buy a boat costing several tens of thousands and doesn't get it surveyed prior to purchasing is an idiot!... And ANY half way decent surveyor should find the mismatched engines even when drunk or recovering from a hangover...
Re: Help needed identifing HP on these Yanmars
Posted: Feb 16th, '18, 23:13
by Kbeach
I know this an old thread but was it a 1981 model in massachusetts?
Re: Help needed identifing HP on these Yanmars
Posted: Feb 17th, '18, 21:12
by Tony Meola
Kbeach wrote:I know this an old thread but was it a 1981 model in massachusetts?
Kbeach
You will need to ask Waggles. Best bet would be to click on his name in the post that will allow you to choose to either PM him or send him an email.