Page 1 of 1

Chrome

Posted: Mar 10th, '15, 08:49
by Harry Babb
Can anyone recommend a good Decorative Chrome shop in the Alabama Florida Tennessee Texas area?

I remember talk from long time ago about a shop in South Florida.....but have lost the name and tele number.

hb

Re: Chrome

Posted: Mar 10th, '15, 09:32
by my other east
Harry,
I use "Space Coast Plating" in Melbourne. They do great work, and a good turn around time.
The number is 321.254.2880, and ask for Shannon.

Re: Chrome

Posted: Mar 10th, '15, 12:32
by bbtiller
Gulf Plating in Ft. Lauderdale? did six cleats, two hawses?, bow chock/running light, and two side steps, and multiple included bolts/washers/nuts for me for right at $1000. Nicely done. Very fast turn around. Here's the contact:

Dave Prentice
Gulf Plating
954-567-0303

Re: Chrome

Posted: Mar 10th, '15, 18:41
by Harry Babb
Thanks gentlemen.

hb

Re: Chrome

Posted: Mar 11th, '15, 06:11
by MarkS
Harry I know this isn't the states you mentioned but back when I did most of the chrome on Razorsharp (the boat came from cape cod, everything was green) this guy did it all. I thought it was expensive at the time but after further review I think he was pretty fair. I could both assist in any shipping needs as well as put my finger on the pulse for you.
Just thought I'd toss it out there.

-M

thechromeshopinc.com

Re: Chrome

Posted: Mar 11th, '15, 06:48
by White Bear
I have also used Space Coast Plating for both marine and automotive jobs - always very pleased with the results.

Re: Chrome

Posted: Mar 11th, '15, 12:49
by PaulJ
Space Coast Plating did my cleats and lee's rod holders and a couple other deck plates. Nice work. About 5 miles from me.