Page 3 of 4
Re: Half Mold 31
Posted: Jan 15th, '15, 22:24
by RAWicklund
What's Gerts time frame? I've got a few wooden shoe, drunk ,low moral country men of his working close by. One friend was over there for the holidays and just got back. Let me check with them about travel plans and shipping ideas and I'll get back to you.
Ray
Re: Half Mold 31
Posted: Jan 16th, '15, 00:13
by Navatech
Bob H. wrote:Any of the faithful going to the Netherlands any time soon? UPS gave me a shipping quite on Gerts half model, I think it would be cheaper to fly it over myself. $386 UPS, $325 DHL, $125 postal express ( no guarantees once it leaves US). Any ideas? BH
I have commercial (i.e. discounted) accounts... If you give me the weight and measurements I can use the quote machines...
Probably the cheapest option would be surface post... That means a slow boat and it will take 4-6 weeks but I have yet to lose a package... Exceptional packaging IS required... I'd pack it in peanuts in a carton... And then I'd pack that carton in another carton... Also with peanuts...
Re: Half Mold 31
Posted: Jan 16th, '15, 09:08
by Bertramp
If shipping to Gert is that crazy, maybe have a plug made and ship that, so he can make his own mold.
Re: Half Mold 31
Posted: Jan 16th, '15, 09:23
by CaptPatrick
Bertramp wrote:If shipping to Gert is that crazy, maybe have a plug made and ship that, so he can make his own mold.
That would be even more costly, time consuming, and added work for Gert....
Re: Half Mold 31
Posted: Jan 16th, '15, 12:56
by Bertramp
That would be even more costly, time consuming, and added work for Gert....
yes, but the end result would be an additional mold, that he arguably might want
Re: Half Mold 31
Posted: Jan 16th, '15, 13:15
by Navatech
Bertramp wrote:If shipping to Gert is that crazy, maybe have a plug made and ship that, so he can make his own mold.
Shipping costs are a function of mode (surface, air), service type (regular, expedited), weight and measurements... A plug would have roughly the same boxed measurements but would be heavier... So, all other factors being equal, shipping a (heavier) plug would cost more then shipping the product of that plug...
Hey, at least you were trying to be helpful :-)
Re: Half Mold 31
Posted: Jan 16th, '15, 21:48
by Tony Meola
Bob
I checked with the guys in the mail room at work. They ship overseas all the time. They told me they had to ship a plastic Penguin (Don't ask) to china and that cost the company $600. I told him roughly the size and the estimates he ratled off the top of his head were close to the numbers you had.
I still think you should check to see if Gert has any orders coming out of the US.
Re: Half Mold 31
Posted: Jan 17th, '15, 12:23
by Bob H.
Problem solved Gert had a US address I can use to ship his model. Tony, what's up with the penguin? Lol..new avatar for you.BH
Re: Half Mold 31
Posted: Jan 17th, '15, 13:12
by jackryan
It'd be great if you guys can post some pictures of the finished product here on the site.
JR
Re: Half Mold 31
Posted: Jan 17th, '15, 13:42
by Navatech
jackryan wrote:It'd be great if you guys can post some pictures of the finished product here on the site.
There are pictures in the previous two pages of the thread...
Re: Half Mold 31
Posted: Jan 17th, '15, 21:34
by Tony Meola
Bob H. wrote:Problem solved Gert had a US address I can use to ship his model. Tony, what's up with the penguin? Lol..new avatar for you.BH
Bob
The Company I work for had some kind of deal on trying to promote some new image based on that cartoon with all the penguins. Didn't work well.
Re: Half Mold 31
Posted: Jan 18th, '15, 07:27
by Olivier
Hello Bob,
Is it still possible to order one ?
I know my request arrived late, but if you can do i will really appreciate.
I have a shipping adress in States (CA)
Thanks
Best regards
Olivier
Re: Half Mold 31
Posted: Jan 18th, '15, 09:00
by Craig Mac
I regularly ship boxes to Hong Kong---I use Express Mail from US Post office---very dependable and cheaper than the private carriers.
New York to Hong Kong takes about 3-5 days--boxes usually 15-20 lbs---run a $100-150
Re: Half Mold 31
Posted: Jan 20th, '15, 15:33
by Gert van Leest
thank all of you for trying to help !!
BR Gert !
Re: Half Mold 31
Posted: Jan 20th, '15, 18:50
by Bertramp
My wife is heading to Italy in April, if that helps (Guys ... if something happens to me, suspect foul play) :-D
Re: Half Mold 31
Posted: Jan 24th, '15, 00:11
by Tony Meola
Bertramp wrote:My wife is heading to Italy in April, if that helps (Guys ... if something happens to me, suspect foul play) :-D
They will probably find you stuffed in a refrigerator.
Re: Half Mold 31
Posted: Jan 24th, '15, 09:16
by jspiezio
Bertramp wrote:My wife is heading to Italy in April, if that helps (Guys ... if something happens to me, suspect foul play) :-D
I think it's hard to extradite from Italy, Oh boy this could get ugly.....
Re: Half Mold 31
Posted: Jan 24th, '15, 14:27
by John F.
On another note, I got my half hull the other day. Very cool. Big thanks to all involved that made this happen.
Re: Half Mold 31
Posted: Jan 25th, '15, 01:36
by mike ohlstein
Re: Half Mold 31
Posted: Jan 25th, '15, 16:55
by Tommy
I like your custom work, Mean Mike.
Re: Half Mold 31
Posted: Jan 25th, '15, 19:53
by Bob H.
Mike, looking good..you have a boot stripe in there? Looks like you peel it afterwards? Keep us posted.BH
Re: Half Mold 31
Posted: Jan 25th, '15, 21:12
by mike ohlstein
The boot stripe is going to need some touching up….
Re: Half Mold 31
Posted: Jan 25th, '15, 23:08
by Tony Meola
Mike
What paint are you using.
Re: Half Mold 31
Posted: Jan 25th, '15, 23:25
by mike ohlstein
Enamel
Re: Half Mold 31
Posted: Jan 26th, '15, 07:35
by mike ohlstein
Re: Half Mold 31
Posted: Jan 26th, '15, 18:44
by ianupton
Nice!
Re: Half Mold 31
Posted: Feb 3rd, '15, 21:44
by gplume
Bob-
Missed your post. We (Sensata) have a facility in Amelo( Netherlands) and have guys going there all the time. Could do the half mold as luggage for sure. Let me know if you get stuck.
Br
Giff
Re: Half Mold 31
Posted: Mar 1st, '15, 10:29
by SteveM
Does someone have a good method for mounting the half mold to a board in order to hang it on the wall? Or even simply to the wall directly.
I would imagine some type of clip or fitting measured just right so the half mold could slide onto it with enough pressure to keep it in place could work...
But I know this crew is full of engineers so I was hoping someone had figured this out already.
Thanks
Steve
Re: Half Mold 31
Posted: Mar 1st, '15, 12:12
by Charlie J
steve
glue a small block of wood in the open back
you can either glue it or use screws from the back of the plague
Re: Half Mold 31
Posted: Mar 1st, '15, 15:01
by SteveM
Thanks Charlie!
Re: Half Mold 31
Posted: Mar 20th, '15, 16:08
by bsmart
Bob,
Would it be possible to order one? I'm in Annapolis.
Thanks,
Robert
Re: Half Mold 31
Posted: Mar 21st, '15, 15:43
by Bob H.
Bob, Sent out a few this week and Tripp will be making another batch which should be ready next week. PM me your address so I can get you a shipping quote. BH
Re: Half Mold 31
Posted: Mar 23rd, '15, 21:58
by Tony Meola
Bob
Just out of curiosity, how many have been made? Anything over 25 then I think it was well worth our getting that mold.
Re: Half Mold 31
Posted: Mar 24th, '15, 17:35
by Bob H.
Tony, total shipped to date with Coolairs model shipped yesterday makes 25. A few more left to ship, Rocket I haven't forgot you. BH
Re: Half Mold 31
Posted: Mar 24th, '15, 17:45
by Rocket
Bob, I have not forgotten either, I need to send you some of those expensive Yankee $$$, Pat too, blowing all my money on kids ski racing these days!! I'll get it out this week, sorry for the delay!
Re: Half Mold 31
Posted: Mar 25th, '15, 05:26
by Charlie J
bob
I am surprised its not more then 25
I thought everyone would be jumping on this
Re: Half Mold 31
Posted: Mar 25th, '15, 07:53
by Navatech
Charlie J wrote:I am surprised its not more then 25
I thought everyone would be jumping on this
Don't forget, some members here have Bertrams but they don't have 31's...
Re: Half Mold 31
Posted: Mar 25th, '15, 13:38
by Charlie J
Don't forget, some members here have Bertrams but they don't have 31's...
why
Re: Half Mold 31
Posted: Mar 25th, '15, 15:52
by Dug
Bob, I have been slacking...
May I throw my hat into the ring for one? I will touch base when I get back from my trip on Monday. Cool?
Thank you,
Dug
Re: Half Mold 31
Posted: Mar 25th, '15, 18:05
by Bob H.
Dug, No worries when you get back just pm me your shipping address. Charlie a few still spoken for plus I haven't kept one for myself yet. I'm guessing we should get in the 30-40 range. I will get a few extra and hope to get one all done up for the rendezvous this year, would make a great prize for the raffle. Trip has done a great job considering the mold has a few years on it. Anyone else get one all painted up yet? Or is the Mean Team leader the only one not hibernating this winter?BH
Re: Half Mold 31
Posted: Mar 25th, '15, 22:20
by Tony Meola
Bob
I think 25 is good, and what I would have expected given who donated for the mold. Now if Steve could find out just what he did with the donor list. His wife is probably holding it ransom until he cleans out the freezer down in Florida.
Re: Half Mold 31
Posted: Mar 28th, '15, 09:20
by mpcrnc
I would also like to order a sanded half hull if possible. Mike Cassidy
Re: Half Mold 31
Posted: Mar 30th, '15, 09:30
by Wursty
I would like to order one (sanded) when you get caught up with your back orders. Thanks,
Re: Half Mold 31
Posted: Mar 30th, '15, 13:56
by Dug
Bob,
I sent ya a PM.
D
Re: Half Mold 31
Posted: Apr 7th, '15, 20:31
by Dug
Bob, did you get my pm?
Dug
Re: Half Mold 31
Posted: Apr 8th, '15, 16:38
by Bob H.
Dug, I just picked six up today will get them ready to go out next week. I will get your quote tomorrow. Been getting my interior squared away and serviced both engines, hope to get her floating in early May. BH
Re: Half Mold 31
Posted: Apr 9th, '15, 15:35
by Dug
Nice!
I understand completely and I got your message!
I am glad you will be floating soon! I've got a ways to go, but thats ok!
Dug
Re: Half Mold 31
Posted: Apr 9th, '15, 15:45
by TailhookTom
Dug wrote:Nice!
I understand completely and I got your message!
I am glad you will be floating soon! I've got a ways to go, but thats ok!
Dug
Dug, when are we going to see some updated pictures? I might have to take a road trip one fo these days and see Alchemy in person!
Tom
Re: Half Mold 31
Posted: Apr 10th, '15, 15:02
by Dug
Tom,
Progress is good, but its detailed now. I guess I should shoot some, but its kind of tough to get the kind of pictures that do it justice. Honestly...
Dug
Re: Half Mold 31
Posted: Apr 10th, '15, 15:05
by Dug
Also, nearly the entire boat is tented right now, so its pretty darned hard to get an idea of what has been done...
